Lundahl LL1623-60 Output Transformer for Tube Amplifiers 60mA

The Lundahl LL1623-60 is a 60 mA tube amplifier output transformer with a special audio C-core, highly sectioned windings and flexible secondary connections for 4, 8 and 16 ohm speaker loads.

Primary Impedance
5.6/3.0/1.6 kΩ
Secundary Impedance
4/8/16 Ω
Power handling
13/25/50

€279.95

2 in stock

Delivery options and total cost confirmed at checkout.

View full specifications
Not sure it fits your setup?

Ask us to check connections, dimensions and compatibility before you order.

Get compatibility advice
SKU: LL1623-60 Categories: , ,
Description

Highlights of the Lundahl LL1623-60

  • 60 mA single-ended output transformer for tube amplifier designs
  • Special Lundahl audio C-core with 125 µm air gap
  • Highly sectioned winding structure for low leakage inductance
  • Flexible secondary wiring options for 4, 8 and 16 ohm loads
  • Open-frame construction for mounting inside an amplifier housing
  • 2.5 kg transformer with 5.08 mm pin spacing and M4 mounting holes

 

Product details Lundahl LL1623-60

Lundahl LL1623-60 Output Transformer for Tube Amplifiers 60 mA

 

The Lundahl LL1623-60 is designed for tube amplifiers and uses the LL1623 winding structure with a 60 mA single-ended operating point. Its special audio C-core is gapped for DC current, helping the transformer handle the standing current of an output tube while preserving headroom for the audio signal.

 

For strong electrical performance, the transformer uses highly sectioned, harmonically sized windings to keep leakage inductance low. Combined with Lundahl’s low-capacitance coil winding technique, this supports a wide usable frequency range. The LL1623 design has a turns ratio of 4 x 13.4 : 8 x 1, 164 ohm primary resistance with all primary windings in series, and 0.4 ohm average resistance per secondary.

 

The LL1623-60 offers flexible secondary connection alternatives for 4, 8 and 16 ohm loads. In the commonly recommended 0.5 dB loss connection, the LL1623 provides a 3.0 kΩ primary load impedance and a 25 W single-ended power limit at 30 Hz. This makes it a practical high-quality amplifier accessory for tube output stages where impedance matching and low-frequency headroom matter.

 

The open-frame construction is intended for installation inside an amplifier housing. Mechanical details include a 2.5 kg weight, 5.08 mm pin spacing, 4 x M4 mounting holes, and a footprint layout of 118 mm x 90 mm with 53 mm height. Primary-to-secondary isolation is rated at 3 kV, with 1.5 kV isolation between windings and core, making this audio component well suited to serious tube amplifier builds.

Specifications

Article numberLL1623-60
EAN9504149312280
Transformer TypeTube amplifier output transformer
Primary Voltage270 V
Primary Impedance5.6/3.0/1.6 kΩ
Secundary Impedance4/8/16 Ω
Power Handling13/25/50
Core TypeC-core
Inductance46 H
Max Output Voltage40 V
Turns Ratio4 x 13.4 : 8 x 1
# Mounting holes4
Dimensions (L x B x H)118 x 78 mm
Article numberLL1623-60
EAN9504149312280
Additional information
Transformer TypeTube amplifier output transformer
Primary Voltage270 V
Primary Impedance5.6/3.0/1.6 kΩ
Secundary Impedance4/8/16 Ω
Power handling13/25/50
Core TypeC-core
Inductance46 H
Max Output Voltage40 V
Turns Ratio4 x 13.4 : 8 x 1
# Mounting Holes4
Dimensions (L x B x H)118 x 78 mm
Shipping & Delivery
USPS Fast Shipping