Hypex FA122 FusionAmp Plate Amplifier

The FA122 2×125 Watt FusionAmp is a DSP controlled two channel plate amplifier. It can be the basis of a two-way active speaker or an active subwoofer.

Input impedance
54k ohms (unbalanced RCA) 44k ohms (balanced XLR DM) 2.2m ohms (balanced XLR CM)
Rated power output
2 x 125 watts at 4 ohms2 x 75 watts at 8 ohms2 x 115 watts at 2 ohms
Rated power output bridged
1 x 200 watts at 4 ohms1 x 250 watts at 8 ohms

€429.95

22 in stock

Delivery options and total cost confirmed at checkout.

View full specifications
Not sure it fits your setup?

Ask us to check connections, dimensions and compatibility before you order.

Get compatibility advice
SKU: FA122 Categories: ,
Description

Highlights

  • Ncore based amplifier technology
  • DSP controlled
  • All-in-one Hypex Solution
  • Neutral and transparent reproduction
  • Wide range of analog and digital inputs

 

Product details

Hypex FA122 2×125 Watt FusionAmp

 

Due to the combination of SMPS, DSP and Ncore based amplifiers packed in this plate amplifier, FusionAmp is one of the best amplification solutions available for active speaker designs. The integrated DSP provides great audio processing functionality. Thanks to the Ncore technology distortion (THD and IMD) over the full audio and power range is negligible. Distortion at listening levels (1W) is unmeasurable.

 

The FA122 has two 125 watt Ncore amplifiers which can also be bridged to form one powerful 250 watt amplifier. A variety of input options ensure compatibility with most source equipment. Hypex provides their HFD (Hypex Filter Design) software to design and configure filters for the FusionAmp. You can easily add functionality to the FusionAmp with the Fusion Remote Kit for remote controllability. Due to thermal regulation, these FusionAmp’s are not airtight.

 

To protect your valuable drivers, the DSP does not contain a filter out of the box. A filter needs to be configured and uploaded using Hypex Filter design (HFD) software before the FusionAmp will produce an output signal. You can download the HFD software at Hypex.

 

Features

  • 15 biquads per amplifier
  • Three selectable presets for filters
  • Source selection
  • Signal detect
  • Auto shutdown
  • BTL capable
  • Clip protect
  • Thermal protect
  • Filter protection

 

What’s in the box?

  • FA122 FusioAmp
  • A printed copy of the user guide
  • Speaker connection cables
  • EU (or UK) C13 Power cable

Specifications

Article numberFA122
EAN0691046948090
Rated power output<p>2 x 125 watts at 4 ohms<br />2 x 75 watts at 8 ohms<br />2 x 115 watts at 2 ohms</p>
Rated power output bridged<p>1 x 200 watts at 4 ohms<br />1 x 250 watts at 8 ohms</p>
Minimum load2 ohms
Signal-to-noise ratio (SNR)118 dB
Distortion0.0015 % THD+N (10-20,000 Hz at 0.5 x rated power output)
Distortion bridged–
Amplifier classificationClass D
Circuit topologyNcore®
Efficiency92 % at full power
Frequency response10 – 50,000 Hz
Input impedance<p>54k ohms (unbalanced RCA) <br/> 44k ohms (balanced XLR DM) <br/> 2.2m ohms (balanced XLR CM) </p>
Input sensitivity1.17 Vrms for rated power output
Auto turn-on sensitivity–
DSPcheck
DACcheck
Maximum sampling rate<p>192 kHz <br/> 96 kHz (optical) </p>
Speaker output channels2
Analog in/out1/1
S/PDIF in/out2/1
AES/EBU in/out1/1
Coaxial in/out1/1
RCA in/out1/ –
XLR in/out2/2
Jack in/out– / –
USB connectioncheck configure port only
Network connection–
Bluetooth–
Subwoofer pre-out–
Auto on/offcheck
Remote controlcheck (sold separately)
App control–
Equalizer (EQ) adjustmentcheck
Equalizer (EQ) profilescheck
Phase controlcheck
Crossover frequency adjustmentcheck
Presetscheck
Control softwareHypex Filter Design
Windows/Mac compatiblecheck/ –
Power requirements200-240 VAC ±10%
Power inlet connectorIEC C14
Standby power consumption–
Current limit12.5 A
Under/over voltage protectioncheck
Dimensions (H x W x D)315 x 120 x 55 mm
Cutout dimensions291 x 96 mm
Article numberFA122
EAN0691046948090
Additional information
Rated power output2 x 125 watts at 4 ohms2 x 75 watts at 8 ohms2 x 115 watts at 2 ohms
Rated power output bridged1 x 200 watts at 4 ohms1 x 250 watts at 8 ohms
Minimum load2 ohms
Signal-to-noise ratio (SNR)118 dB
Distortion0.0015 % THD+N (10-20,000 Hz at 0.5 x rated power output)
Amplifier classificationClass-D
Circuit TopologyNcore®
Efficiency92 % at full power
Frequency response10 – 50,000 Hz
Input impedance54k ohms (unbalanced RCA) 44k ohms (balanced XLR DM) 2.2m ohms (balanced XLR CM)
Input sensitivity1.17 Vrms for rated power output
DSPcheck
DACcheck
Maximum sampling rate192 kHz 96 kHz (optical)
Speaker output channels2
Analog in/out1/1
S/PDIF in/out2/1
AES/EBU in/out1/1
Coaxial in/out1/1
RCA in/out1/ –
XLR in/out2/2
Jack in/out– / –
USB connectioncheck configure port only
Auto on/offcheck
Remote controlcheck (sold separately)
Equalizer (EQ) adjustmentcheck
Equalizer (EQ) profilescheck
Phase controlcheck
Crossover frequency adjustmentcheck
Presetscheck
Control softwareHypex Filter Design
Windows/Mac compatiblecheck/ –
Power Requirements200-240 VAC ±10%
Power inlet connectorIEC C14
Current limit12.5 A
Under/over voltage protectioncheck
Dimensions (H x W x D)315 x 120 x 55 mm
Cutout dimensions291 x 96 mm
Shipping & Delivery
USPS Fast Shipping