Showing 1–20 of 74 resultsSorted by latest
Visaton TW 70 Replacement Cone Tweeter
55 mm (2.2â€) Cone tweeter with special basket for the high-frequency range above 5,000 Hz. HighlightsBalanced response for easy system integrationGreat replacement driverSealed rear Product details Visaton TW 70 2.5" Cone Tweeter 8 Ohm This tweeter has a balanced frequency response with brilliant treble and high power handling. Due to the sealed rear no separate high-frequency range housing construction necessary. Especially suitable as replacement unit for many HiFi speakers.Visaton HTH 8.7 Horn Tweeter
Professional CD-Horn (constant directivity) for the high-range above 3,000 Hz. HighlightsGreat dispersion patternHigh power handlingWide horizontal and vertical dispersion creates room filling soundGreat for PA and stage monitors Product details Visaton HTH 8.7 Professional CD-Horn 8 Ohm With excellent response from 1,200 Hz to 16,000 Hz up to 45° off axis, Visaton's HTH 8.7 8 ohm constant directivity horn tweeter is an ideal tweeter for use in stage monitors and small PA speakers, or even in high efficiency home speaker designs.  Visaton's HTH 8.7 8 ohm professional CD (constant directivity) horn tweeter is designed to accurately reproduce high frequencies above 3,000 Hz. The square shaped horn system is made of rugged black plastic and equipped with a 1" voice-coil for high power handling. Thanks to a smooth roll off on both the high and low end of its useable bandwidth crossover design for this tweeter will be simple and predictable. This horn is an ideal high range component for compact 2- and 3-way speakers used as stage monitors or small PA for instruments and vocals. With its smooth response and wide dispersion, the HTH 8.7 is also an excellent choice for use in high efficiency home speaker designs.Show more Show lessVisaton KE 25 SC Dome Tweeter
25 mm (1") High-end magnetically shielded tweeter with ceramic diaphragm for crystal clear perfectly reproduced sound without distortion, even at high volume. HighlightsCeramic domeGreat omnidirectional sound distribution at high frequency'sLinearized impedance due to integrated LRC element Product details Visaton KE 25 SC 1" High-End Tweeter This tweeter has a perforated pole piece coupled with the flow-optimized rounded shape, the damping in the cavity and the ventilated voice coil carrier guarantee a very low resonance frequency. The impedance is linearized by means of an integrated LRC element. This means that the dome can be easily integrated in a network of crossovers. The protective grille is fitted on the inside with an acoustic low-pass filter in the shape of a transparent ring, which does not begin to operate until 25 kHz are achieved, when it damps any material-borne resonance. The grille has the added advantage of improving omnidirectional sound distribution at higher frequencies.Show more Show lessVisaton MHT 12 Magnetostatic Ribbon Tweeter
High-end magnetostat tweeter with solid aluminum die-cast front. Effective from 4000 Hz upwards due to the large diaphragm area and low self-resonance. HighlightsExtremely thin diaphragmHigh efficiency due neodymium/boron magnetsAluminum diecast front Product details Visaton MHT 12 High-End Tweeter-Range Magnetostat 8 Ohm This tweeter has an extremely thin base layer of the diaphragm, this means there is very little mass to set in motion which guarantees a high degree of signal fidelity and broad frequency response. High efficiency is guaranteed by the neodymium boron magnets. Low distortion factor, good power-handling capabilities, highly linear impedance and amplitude frequency response and the broad frequency response range make the MHT 12 - 8 Ohm a highly versatile tweeter unit for the discerning listener. Screened magnets.Show more Show lessVisaton SC 10 N Dome Tweeter
25 mm (1") Shielded fabric tweeter for the high range above 3,000 Hz. HighlightsFabric domeMagnetically shieldedSpecial dome coating for linear frequency response Product details Visaton SC 10 N 1" Fabric Tweeter Linear frequency re-sponse is achieved by a special dome coating and ferrofluid-cooled voice-coil for high power handling. Suitable for shielded medium sized 2-way combinations for surround center speakers and multi-media systems in conjunction with the shielded full range driver SC 13.Visaton SC 5 Dome Tweeter
13 mm (0.5") Magnetically shielded polycarbonate dome driver for the high-frequency range above 4,000 Hz. HighlightsGreat for compact speaker designsMagnetically shieldedSpecial grill for excellent dispersion4 kHz to 22 kHz usable frequency responseHigh power handling and shielded design Product details Visaton SC 5 1/2" Polycarbonate Tweeter The SC 5 1/2" dome tweeter from Visaton is a natural choice for speaker builders designing desktop recording monitors, surround sound multimedia speakers, or center channels.  Visaton's SC 5 shielded 1/2" polycarbonate dome tweeter is built for superior off-axis response, high sensitivity, and a relatively flat frequency response from 4,000 Hz to 10,000 Hz. Above 10,000 Hz, the SC5 features a rising response to add ambiance and sparkle. The small size of this tweeter lends itself to be used in small 2-way monitors, center-channel speakers, and multimedia speakers where a shielded design is desired.Show more Show lessVisaton TI 100 4″ High-End Mid-Range Driver 8 Ohm
10 cm (4") High-End mid-range driver featuring a diaphragm cone made of pure titanium. HighlightsPure titanium coneDouble magnet motorRear plate vented voice coil Product details Visaton TI 100 4" High-End Mid-Range Driver 8 Ohm The carefully designed cone combines with the shape and material of the surround and the adhesives to avoid cone resonance. The shape of the basket with its large aperture and rear-ventilated damper coupled with the open voice coil with its phase plug produce the lowest possible mechanical losses and produce a correspondingly high mechanical Q. As a result of the construction using double magnets the TI 100 - 8 Ohm is also magnetically compensated. The TI 100 - 8 Ohm is ideal as a mid-bass unit in smaller high end shelf speakers or as a mid-range unit in high-end multi-way Speakers.Show more Show lessVisaton TL 16 H Horn Dome Tweeter
High-End horn driver for the high-frequency range above 5,000 Hz. HighlightsAluminum-titanium alloy diaphragmVery dynamic pulse responseHigh sensitivity Product details Visaton TL 16 H High-End horn driver The extremely light aluminum titanium alloy diaphragm shows, apart from a very dynamic pulse response, a very linear frequency response. The powerful strontium-ferrite magnet and the 16 mm voice-coil are a guarantee for highest efficiency.Visaton TW 6 NG Replacement Cone Tweeter
55 mm (2.2â€) Cone tweeter for the high-frequency range above 5,000 Hz. HighlightsBalanced response for easy system integrationGreat replacement driverSealed rear Product details Visaton TW 6 NG 2.2" Cone Tweeter 8 Ohm This tweeter has a balanced frequency response with brilliant treble and high power handling. Due to the sealed rear no separate high-frequency range housing construction necessary. Especially suitable as replacement unit for many HiFi speakers.Visaton G 20 SC Dome Tweeter
Magnetically shielded 20 mm (0.8") High-end textile dome unit for use at tweeter frequencies of 3,000 Hz and above.  HighlightsOptimised dome shape for balanced frequency responseFerrofluid-cooled 8 ohm voice coil88 dB sensitivity Product details Visaton G 20 SC 0.8" High-End Textile Tweeter The optimized dome shape and damping felt on the pole piece ensures a very balanced frequency response without resonance and excellent omnidirectional sound distribution. The powerful magnet drive and ferro-fluid cooled voice coil guarantee both high efficiency and excellent power handling capabilities.Show more Show lessVisaton Waveguide WG 148 R
14.8 cm Waveguide made from high-quality plastic for 25 mm tweeters. HighlightsSuitable for G 25 FFL, KE 25 SC and many other tweetersMade from high-quality plasticFor higher output lever and better coupling with woofer Product details Visaton Waveguide WG 148 R The exponential enlargement provides a high sound pressure level gain in the lower high frequency range, which discharges the tweeter. In addition, the focus and the coupling to a woofer are improved, because the sound generation planes move closer together. For fixation of the tweeter on the waveguide 4 pieces M4 screws (length approx. 10 mm) are added. This waveguide is suitable for: G 25 FFL - 8 Ohm; KE 25 SC - 8 Ohm Would you like to know more about how to waveguide the tweeter of your choice with this product? Here is a blog post on the subject!Show more Show lessVisaton G 25 FFL Dome Tweeter
25 mm (1") fabric dome driver for the high-frequency range above 2000 Hz. HighlightsCrossover point from 2,000 Hz and up90 dB sensitivityGreat power handling Product details Visaton G 25 FFL 1" Fabric Tweeter Due to the optimized dome shape with double coating in conjunction with the highly damped surround, linear frequency response has been made possible. Due to the powerful magnetic driver and the ferrofluid-cooled voice-coil high efficiency and high power handling can be guaranteed.Visaton Waveguide WG 220×150
15 x 22 cm Waveguide made from high-quality plastic for 25 mm tweeters. HighlightsMade from high-quality plasticSuitable for G 25 FFL, KE 25 SC, DSM 25 and many other 1†tweetersFor higher output level, better dispersion and better coupling with woofer Product details Visaton Waveguide WG 220x150 The exponential enlargement provides a high sound pressure level gain in the lower high frequency range, which discharges the tweeter. In addition, the focus and the coupling to a woofer are improved, because the sound generation planes move closer together. This Waveguide was adjusted in width and length to 13 cm (e.g., AL 130 8 Ohm) and 20 cm (e.g., AL 200 8 Ohm) loudspeakers. For the connection of the tweeter 4 pieces M4 screws (length approx. 10 mm) are added. Would you like to know more about how to waveguide the tweeter of your choice with this product? Here is a blog post on the subject!Show more Show lessVisaton G 25 FFL Dome Tweeter
25 mm (1") fabric dome driver for the high-frequency range above 2000 Hz. HighlightsCrossover point from 2,000 Hz and up90 dB sensitivityGreat power handling Product details Visaton G 25 FFL 1" Fabric Tweeter Due to the optimized dome shape with double coating in conjunction with the highly damped surround, linear frequency response has been made possible. Due to the powerful magnetic driver and the ferrofluid-cooled voice-coil high efficiency and high power handling can be guaranteed.Visaton Waveguide WG 220×150
15 x 22 cm Waveguide made from high-quality plastic for 25 mm tweeters. HighlightsMade from high-quality plasticSuitable for G 25 FFL, KE 25 SC, DSM 25 and many other 1†tweetersFor higher output level, better dispersion and better coupling with woofer Product details Visaton Waveguide WG 220x150 The exponential enlargement provides a high sound pressure level gain in the lower high frequency range, which discharges the tweeter. In addition, the focus and the coupling to a woofer are improved, because the sound generation planes move closer together. This Waveguide was adjusted in width and length to 13 cm (e.g., AL 130 8 Ohm) and 20 cm (e.g., AL 200 8 Ohm) loudspeakers. For the connection of the tweeter 4 pieces M4 screws (length approx. 10 mm) are added. Would you like to know more about how to waveguide the tweeter of your choice with this product? Here is a blog post on the subject!Show more Show lessVisaton WS 25 E 10″ HiFi Woofer 8 Ohm
25 cm (10") woofer with coated paper cone, rubber surround and extended rear pole plate for long strokes. HighlightsHigh Qts design for sealed cabinetsRubber surround won't disintegrateBumped backplate and 5.5 mm of Xmax Product details Visaton WS 25 E 10" HiFi Woofer 8 Ohm Visaton designed this woofer to replace vintage and modern home audio hi-fi woofers in sealed cabinet speakers. For a classic natural sound, the WS 25 E features a coated paper cone. A rubber surround and bumped back plate protect this woofer from overexcursion. Both the low free-air resonance and low inductance allow this driver to play from 34 Hz up to 6,000 Hz, making great for use in small 3-way speakers as well as large format 2-way speakers.Show more Show lessVisaton WS 13 E 5″ HiFi Full-Range Driver 8 Ohm
13 cm (5") HiFi full-range driver with paper cone and elastic rubber surround. HighlightsFull-range or low-midrange implementationGreat replacement driverSpecial basket design Product details Visaton WS 13 E 5" HiFi Full-Range Driver Can be used as a low-midrange driver too. Due to the special basket design especially suitable as replacement driver for many HiFi speakers.Visaton W 300 – 8 12″ Woofer 8 Ohm
30 cm (12") woofer with air-dried cone and pressure vented pole piece. HighlightsVery flat frequency response for easy system integrationGreat for use as a HiFi woofer or as a subwooferGreat sensitivity combined with low Fs and Qts for high performance Product details Visaton W 300 - 8 12" Woofer 8 Ohm This woofer is designed to be a high performance replacement speaker at a budget price point. A foam surround, ribbed treated-paper cone, and vented pole piece offer longevity while capturing that classic sound from the golden era of loudspeakers. An excursion limit of ±14 mm allows this driver to pump out some serious bass, rivaling some subwoofer, in many different sized sealed, acoustic suspension or ported cabinets. A smooth frequency response makes for easy integration with many different midrange speakers and tweeters.Show more Show lessVisaton W 250 S – 8 10″ HiFi Woofer 8 Ohm
The W 250 S 10" woofer from Visaton delivers amazing performance not normally found in drivers this size at this price point. A low Qts allows you to get very deep bass in a reasonably sized ported enclosure. HighlightsVery flat frequency response for easy system integrationGreat for use as a HiFi woofer or as a subwooferGreat sensitivity combined with low Fs and Qts for high performance Product details Visaton W 250 S 10" HiFi Woofer 8 Ohm This woofer features a coated paper cone, durable rubber surround, and a bumped back plate to an excursion limit of ±7 mm. A balanced design approach between sensitivity, smooth frequency response (cross it over as high as 2,500 Hz), and extended bass allows this driver to be used as a high-output HiFi woofer in three-way speaker systems or as a subwoofer.Show more Show lessVisaton W 250 S – 4 10″ HiFi Woofer 4 Ohm
The W250 S 10" woofer from Visaton delivers amazing performance not normally found in drivers this size at this price point. A low Qts allows you to get very deep bass in a reasonably sized ported enclosure.  HighlightsVery flat frequency response for easy system integrationGreat for use as a HiFi woofer or as a subwooferGreat sensitivity combined with low Fs and Qts for high performance Product details Visaton W 250 S 10" HiFi Woofer 4 Ohm This woofer features a coated paper cone, durable rubber surround, and a bumped back plate to allow an excursion limit of ±7 mm. A balanced design approach between sensitivity, smooth frequency response (cross it over as high as 2,500 Hz), and extended bass allows this driver to be used as a high-output HiFi woofer in three-way speaker systems or as a subwoofer. The 4-ohm impedance allows this driver to be used in most car audio systems.Show more Show less
