Vibrofiltr Felt Acoustic 12 is a self-adhesive material that is very light and flexible. It is made of natural pressed fiber with a very high density of 1470 g/m2. It has a thickness of 12mm and is characterized by its high sound absorption capacity and good thermal insulation properties. It is used for acoustic insulation of cars and can be installed on flat or complex surfaces such as door panels and inner wheel arches. HighlightsThickness, mm 12Sheet length, 800 mmWidth of a sheet, 500 mmGlue layer: one-sided, protected by paper or filmColor: grayDensity: g / m2 800 Product details Vibrofiltr Felt acoustic 12mm Natural Non-woven Fabric | 50x80cm Material: self-adhesive needle-punched synthetic non-woven material, which is made by interlacing and subsequent mechanical glue-free pressing of fibers, the basis of which is a felt silencer. Acrylic glue, protected by anti-adhesive film or paper, is applied on felt on one side. The main application of the material of this brand: the material is intended for use as heat, sound insulation of the cabin of cars of all types.Show more Show less

Vibrofiltr Autoshim Black Flex 10mm is a self-adhesive material based on foamed rubber with damping and sound-absorbing properties. It is very plastic, which allows the material to be used to treat difficult surfaces under various operating conditions. It is thermo and heat insulating material with high ductility that can be used for processing complex surfaces in various application conditions. HighlightsBase: foamed rubberSize sheet: 50*50 cmUse temperature С: - 40 to + 85Density: 65 ± 25 kg / m3Environmentally friendly: no asbestos; No CFC-HCFCSound insulation DIN 4109: up to 36 dB (А)Thermal conductivity: 0.32-0.34 λ W/(mK)Black Colour Product details Vibrofiltr Autoshim Black Flex 10mm Acoustic Foamed Rubber | 50x75cm Autoshim Black Flex 10 mm - it is thermo and heat insulating material based on foamed rubber, has properties of absorption and sound attenuation. It is very plastic, which allows the material to be used to treat difficult surfaces under various operating conditions. The product is oil resistant and non-flammable, does not emit toxins, which allows it to be used on all surfaces of the body and in the engine compartment.Show more Show less

Vibrofiltr Autoshim Black Flex 6mm is a self-adhesive material based on foamed rubber with damping and sound-absorbing properties. It is very plastic, which allows the material to be used to treat difficult surfaces under various operating conditions. It is thermo and heat insulating material with high ductility that can be used for processing complex surfaces in various application conditions. HighlightsBase: foamed rubberSize sheet: 50*50 cmUsage temperature С: - 40 to +85Density: 65 ± 25 kg / m3Environmentally friendly: no asbestos; No CFC-HCFCSound insulation DIN 4109: up to 36 dB (А)Thermal conductivity: 0.32-0.34 λ W/(mK) Product details Vibrofiltr Autoshim Black Flex 6mm Acoustic Foamed Rubber | 50x75cm Autoshim Black Flex 6 mm - it is thermo and heat insulating material based on foamed rubber, has the properties of absorption and sound attenuation. It is very plastic, which allows the material to be used to treat difficult surfaces under various operating conditions. The product is oil resistant and non-flammable, does not emit toxins, which allows it to be used on all surfaces of the body and in the engine compartment.Show more Show less

Vibrofiltr Autoshim Black Layer Tape 7mm is a sound-absorbing material that is used as a sealant for internal linings. It is soft and flexible, making it easy to install on flat or complex surfaces. The tape has a thickness of 7mm and is based on polyurethane foam with latex impregnation. It has a sticky layer that is protected with an anti-adhesion film. Highlightssheet size: 0.5 x 0.5 mMaterial thickness: 7 mmTemperature range of operability: - 40 + 100С Product details Vibrofiltr Autoshim Black Layer Tape 7mm Polyurethane Foam | 50x50cm Interlining material based on polyurethane foam, with latex impregnation (black color). With a sticky layer, protected with an anti-adhesion film. Application area:- sealant for internal linings of speaker and subwoofer cabinets- to eliminate the creaking of the dashboard, torpedoes- plastic interior partsShow more Show less

Vibrofiltr Autoshim Black Layer Tape 5mm is a sound-absorbing material that is used as a sealant for internal linings. It is soft and flexible, making it easy to install on flat or complex surfaces. The tape has a thickness of 5mm and is based on polyurethane foam with latex impregnation. It has a sticky layer that is protected with an anti-adhesion film. Highlightssheet size: 0.5 x 0.5 mMaterial thickness: 5 mmTemperature range of operability: - 40 + 100С Product details Vibrofiltr Autoshim Black Layer Tape 5mm Polyurethane Foam | 4x195cm Interlining material based on polyurethane foam, with latex impregnation (black color). With a sticky layer, protected with an anti-adhesion film. Application area:- sealant for internal linings of speaker and subwoofer cabinets- to eliminate the creaking of the dashboard, torpedoes- plastic interior partsShow more Show less

Vibrofiltr Autoshim Sound Wave 15 is a self-adhesive foam material that is very soft and very flexible. It is made of a combination of open and closed cells with high density foam based on polyurethane foam. It is characterized by its high sound absorption capacity in the range of medium and high frequencies of the acoustic band. It has a thickness of 15mm and is available in sheet sizes of 500x500 mm / 0.25 m2. It can be used as a sound-absorbing mat for cars. Highlightssheet size - 0.5 x 0.5 mMaterial thickness - 15 mmSound absorption level - 80%Temperature range of operability: - 40 + 90С Product details Vibrofiltr Autoshim Sound Wave 15mm Acoustic Damping | 50x50cm WAVE 15 mm materials have a pyramidal face, which makes it much more efficient to absorb and dissipate noise in comparison with the proposed analogs. Similar materials handle the inner surface of the walls of sound recording studios in order to obtain the highest quality and clean quality of audio recording. 10 times more effective than the standard foam rubber (sound absorption in the frequency range 1200 - 10000Hz). It is also Non-flammable. Application area:Speaker cabinetsCar subwoofer buildsCeilingsWheel archesThe partition of the engine compartmentShow more Show less

Vibrofiltr Premium 1.5mm Alubutyl is a composite material based on high-quality butyl rubber and polymers reinforced with extruded aluminum foil. It is mainly used to form a vibration damping as well as waterproof layer in cars. But it also perfectly suited to use in speaker cabinets because of their unique properties. HighlightsHighly effective soundproofing materialReduces vibration and noiseEasy to installDurable and long-lasting Product details Vibrofiltr Premium 1.5mm Alubutyl VIBRO-Damping | 50x35cm Vibrofiltr Premium 1.5mm Alubutyl VIBRO-Damping is a sound deadening mat that eliminates noise and resonance created by reflections. It uses mass loading to lower panel resonance and absorb structural vibrations, converting them into low-level heat. VibroFiltr damping mats are flexible, self-adhesive, composed of butyl rubber and aluminum foil. The thickness of the butyl layer is 1.5mm.Show more Show less

The Vibrofiltr Felt Acoustic 8mm is a very light and flexible soundproofing material based on pressed natural non-woven acoustic felt with very high density. It is characterized by high sound absorption capacity and good thermal insulation properties. The mats are designed for use in dry places inside the vehicle cabin, where it effectively deadens noise in a wide range of frequencies. HighlightsThickness, mm 8Sheet length, 750 mmWidth of a sheet, 500 mmGlue layer: one-sided, protected by paper or filmColor: grayDensity: g / m2 650 Product details Vibrofiltr Felt acoustic 8mm Natural Non-woven Fabric | 50x80cm Material: self-adhesive needle-punched synthetic non-woven material, which is made by interlacing and subsequent mechanical glue-free pressing of fibers, the basis of which is a felt silencer. Acrylic glue, protected by anti-adhesive film or paper, is applied on felt on one side. The main application of the material of this brand: the material is intended for use as heat, sound insulation of the cabin of cars of all types.Show more Show less

Vibrofiltr Premium 2mm Alubutyl VIBRO-Damping is a vibration-damping material that is used to improve the sound insulation and performance of a variety of applications. It is made of a multilayer structure of butyl rubber and aluminum foil, which gives it high pliability and flexibility. Vibrofiltr Alubutyl is easy to install and does not require preheating. It is also waterproof and corrosion-resistant. HighlightsImproves sound insulationImproves performanceEasy to installWaterproof and corrosion-resistant Product details Vibrofiltr Premium 2mm Alubutyl VIBRO-Damping | 50x35cm If you are looking for a vibration-damping material that can improve the sound insulation and performance of your application, Vibrofiltr Premium 2mm Alubutyl VIBRO-Damping is a good option. It is easy to install, durable, and effective. The self-adhesive mat is used for damping vibrations, noises, and acoustic resonances. Here are some of the places where Vibrofiltr Alubutyl can be used:Speaker cabinetsCar audio applicationsCar doorsCar floorsCar roofsCar trunksMotorcyclesBoatsOther vehicles Vibrofiltr Alubutyl can also be used in other applications where vibration damping is needed, such as:Industrial machineryConstruction equipmentMusical instrumentsElectronic devicesShow more Show less

Vibrofiltr Premium 3mm Alubutyl is a composite material based on high-quality butyl rubber and polymers reinforced with extruded aluminum foil. It is mainly used to form a vibration damping as well as waterproof layer in cars. But it also perfectly suited to use in speaker cabinets because of their unique properties. HighlightsIt is a self-adhesive mat that is used for damping vibrations, noises and acoustic resonances.It is made of a composite material based on high quality butyl rubber (butyl rubber) and aluminum foil.It is 3mm thick and has high strength.Dimensions 350mm x 500mm x 3mmThe mats are black in color. Product details Vibrofiltr Premium 3mm Alubutyl VIBRO-Damping | 50x35cm Vibrofiltr Premium 3mm Alubutyl is a self-adhesive mat that is used for damping vibrations, noises and acoustic resonances. It is made of a composite material based on high quality butyl rubber (butyl rubber) and aluminum foil. It is 3mm thick and has high strength.  The material is highly pliable and flexible. A single mat has the dimensions (350mm x 500mm x 3mm) and they are black in color. The self-adhesive mat is used for damping vibrations, noises, and acoustic resonances.Show more Show less

Vibrofiltr Premium 4mm Alubutyl is a composite material based on high-quality butyl rubber and polymers reinforced with extruded aluminum foil. It is mainly used to form a vibration damping as well as waterproof layer in cars. The material is highly pliable and flexible. A single mat has the dimensions (350mm x 500mm x 4mm). The self-adhesive mat is used for damping vibrations, noises, and acoustic resonances. HighlightsSound-absorbing materialUsed as a sealant for internal liningsSoft and flexibleThickness of 5mmBased on polyurethane foam with latex impregnationSticky layer that is protected with an anti-adhesion film Product details Vibrofiltr Premium 4mm Alubutyl VIBRO-Damping | 50x35cm The main use of the material of this brand: vibroabsorbing and waterproofing covering of vehicles. but it also perfectly suited to use in speaker cabinets because of their unique properties. Vibrofiltr Premium 4mm Alubutyl:Composite material based on high-quality butyl rubber and polymers reinforced with extruded aluminum foilMainly used to form a vibration damping as well as waterproof layer in carsHighly pliable and flexibleDimensions of mat 350mm x 500mm x 4mmSelf-adhesive mat used for damping vibrations, noises, and acoustic resonancesShow more Show less