Showing 1–8 of 189 resultsSorted by latest
SB Acoustics Satori TW29TXNWG-4 Dome Tweeter
HighlightsBeryllium dome for non-resonant high frequency extensionTwo part aluminum faceplate with integrated mechanical decouplingDual balanced compression chambers for improved dynamicsDual copper caps for absolute minimum voice coil inductance and minimum phase shiftNon-reflective cast aluminum chamber with optimized damping for improved dynamicsShallow flow optimized magnet structure for optimum coupling to rear chamberCCAW voice coil for low moving massLong life silver lead wiresLow resonance frequency for extended range Product details SB Acoustics Satori TW29B Beryllium Dome Tweeter The new Satori Beryllium dome tweeter with ferrite magnet has arrived! Beryllium is known for its open and spatial sound, often described as holographic. The self-damping properties of Beryllium allow for an extended response without a huge spike in the response at higher frequencies seen in most metal dome tweeters. All dome materials have a different tonal and spatial presentation. Beryllium has a real positive difference, providing an experience unlike all other dome materials. This new ferrite magnet version has a little less output for a very competitive price. Specifications: BL Product (BL): 2 Tm N • Diaphragm Mass Inc. Airload (Mms): 0.46 g • Maximum Linear Excursion (Xmax): 0.25 mm • Surface Area of Cone (Sd): 9.6 cm2Show more Show lessSB Acoustics SB15NRXC30-8 5″ Midrange Woofer SALE
HighlightsVented cast aluminum chassis for optimum strength and low compressionProprietary cone material with natural fibers made in-houseSoft low damping rubber surround for improved transient responseNon-conducting fiberglass voice coil former for minimum dampingExtended copper sleeve on pole piece for low inductance and low distortionCCAW voice coil for reduced moving massLong life silver lead wiresVented pole piece for reduced compression Product details SB Acoustics SB15NRXC30-8 5" Midrange Woofer Papyrus cone with an optional thin polyurethane protection coating. Low damping SBR rubber surround with high exertion and resilience. Open structure cast frame for reduced reflections and compression. Aluminum alloy for light weight, non-magnetic and extra rigidity. Shorting Copper cap on pole piece. Non-inductive CCAW fiber glass 30mm coil former. Silver lead wires. Vented pole piece. The goal of SB Acoustics with their NRX series of performance drivers has been to design a simple, yet optimized speaker driver at a competitive price to achieve a high performance to cost ratio for their customers who appreciate premium quality audio. To that end, close attention has been payed to design engineering with manufacturing materials and processes to optimize performance.Show more Show lessSB Acoustics SB20PFCR30-8 Full-range Woofer
This 8" papyrus fiber paper cone woofer is a great value for this build quality and performance.  The specifications make it a good choice for many different enclosure types.  An extended and smooth frequency response suggests simple crossovers, even none at all.  HighlightsVented reinforced plastic chassisProprietary cone material with natural fibers made in-houseSoft low damping rubber surround for improved transient responseLarge spider for improved linearityOptimized motor systemVented coil former for low compressionNon-resonant long life lead wires Product details PAM8610 2 x 10W Class D Audio Amplifier Board This 8" papyrus fiber paper cone woofer is a great value for this build quality and performance.  The specifications make it a good choice for many different enclosure types.  An extended and smooth frequency response suggests simple crossovers, even none at all. Show more Show lessSB Acoustics SB29RDAC-C000-4 Dome Tweeter
 HighlightsNon-resonant diaphragm design for minimum high frequency break-upHigh efficiency 93 dB (2,83 V/1m)Dual balanced compression chamber for improved dynamicsCopper cap for reduced voice coil inductance and minimum phase shiftSaturation controlled motor system for low distortionNon-reflective rear chamber with optimized damping for improved dynamicsFlow optimized vented pole piece for optimum coupling tot rear chamberCCAW voice coil for low moving massLong life silver lead wiresLow resonance frequency Product details SB Acoustics SB29RDAC-C000-4  Fabric Ring-Radiator Tweeter The SB Acoustics SB Acoustics SB29RDAC-C000-4 is a fabric Ring-Radiator tweeter features an extended high frequency response. This results in a low distortion sound representation within the range of the human hearing. The chambers within this tweeter unit are designed for improved dynamics. The driver also features a low Fs point of 600 Hz to allow for a low crossover point. A crossover point of at least 2600Hz is recommend with a second order 12dB/oct slope.Show more Show lessSB Acoustics SB29RDC-C000-4 Ring Dome Tweeter
HighlightsNon-resonant diaphragm design for minimum high frequency break-upDual balanced compression chamber for improved dynamicsCopper cap for reduced voice coil inductance and minimum phase shiftSaturation controlled motor system for low distortionNon-reflective rear chamber with optimized damping for improved dynamicsFlow optimized vented pole piece for optimum coupling to rear chamberCCAW voice coil for low moving massLong life silver lead wiresLow resonance frequencyThe larger terminal is the positive Product details SB Acoustics SB29RDC-C000-4 Ring Dome Tweeter This tweeter features a proprietary fabric ring dome with a large roll surround. Stabilizing the center of the dome greatly reduces distortion and brings the acoustic center of the tweeter back to the voice coil, with the added benefit of increased sensitivity. The tweeter has a chambered back designed to provide a lower resonance frequency and reduce back wave reflections from the dome. A copper cap is used on the pole piece. Large surface area. Specifications: Diaphragm Mass Inc. Airload (Mms): 0.45 g • Maximum Linear Excursion (Xmax): 0.25 mm • Surface Area of Cone (Sd): 9.6 cm2Show more Show lessSB Acoustics SB29RDNC-C000-4 Ring Dome Tweeter
HighlightsNon-resonant diaphragm design for minimum high frequency break-upCCAW voice coil for low moving massLong life silver lead wiresLow resonance frequencyCopper cap on pole piece for reduced voice coil inductance and minimum phase shiftInherently shielded neodymium motor systemInternal pressure equalization and flow resistor for non-resonant coupling of cavitiesCompact design Product details SB Acoustics SB29RDNC-C000-4 Ring Dome Tweeter with Neodymium MagnetThis tweeter features a proprietary fabric ring dome with a large roll surround. Stabilizing the center of the dome greatly reduces distortion and brings the acoustic center of the tweeter back to the voice coil, with the added benefit of increased sensitivity. The tweeter has a chambered back designed to provide a lower resonance frequency and reduce back wave reflections from the dome. A copper cap is used on the pole piece. Specifications: Diaphragm Mass Inc. Airload (Mms): 0.45 g • Maximum Linear Excursion (Xmax): 0.25 mm • Surface Area of Cone (Sd): 9.6 cm2Show more Show lessSB Acoustics Satori TW29R Ring Dome Tweeter
HighlightsNon-resonant diaphragm design for minimum high frequency break-upTwo part aluminum faceplate with integrated mechanical decouplingDual balanced compression chambers for improved dynamicsDual copper caps for absolute minimum voice coil inductance and minimum phase shiftSaturation controlled motor system with T-shaped pole piece for lower distortionNon-reflective cast alumimum chamber with optimized damping for improved dynamicsFlow optimized vented pole piece for optimum coupling to rear chamberCCAW voice coil for low moving massLong life silver lead wiresLow resonance frequency for extended range Product details SB Acoustics Satori TW29BN Ring Dome TweeterThe TW29R is a premium ring dome tweeter offered by SB Acoustics. This tweeter has many advanced technology features that culminate in very detailed and low distortion output. This tweeter is a perfect choice in any high end system.  Specifications: BL Product (BL): 2.0 Tm • Diaphragm Mass Inc. Airload (Mms): 0.45 g • Maximum Linear Excursion (Xmax): 0.25 mm • Surface Area of Cone (Sd): 9.6 cm2Show more Show lessSB Acoustics Satori TW29RN Dome Tweeter White
The SB Acoustics Satori TW29RN Dome Tweeter is a premium ring dome tweeter offered in the Satori line by SB Acoustics. This tweeter has many advanced technology features that culminate in very detailed and low distortion output: a perfect choice in any high end system. The tweeter has a frequency response range of 1.5 kHz to 30 kHz. HighlightsNon-resonant diaphragm design for minimum high frequency break-upTwo part aluminium faceplate with integrated mechanical decouplingDual balanced compression chambers for improved dynamicsDual copper caps for absolute minimum voice coil inductance and minimum phase shiftHigh saturation neodymium motor system with T-shaped pole piece for lower distortionNon-reflective cast aluminium chamber with optimized damping for improved dynamicsShallow flow optimized magnet structure for optimum coupling to rear chamberCCAW voice coil for low moving massLong life silver lead wiresLow resonance frequency for extended range Product details SB Acoustics Satori TW29RN Dome Tweeter White Ring The SB Acoustics Satori TW29RN tweeter is a high-performance tweeter that is designed for use in high-end audio systems. It features a number of advanced technologies that help to deliver detailed and accurate sound reproduction.  This white version of the SB Acoustics Satori TW29RN tweeter is a high-performance tweeter that is designed for use in high-end audio systems. It features the same advanced technologies as the black version (TW29RN-B & TW29RN-B-8ohm), but it has a white anodized aluminum faceplate. This makes it a good choice for applications where a white tweeter is desired, such as in white speaker cabinets or in home theaters where the tweeters are visible.Show more Show less











































