Showing all 20 resultsSorted by latest
miniDSP PWR-ICE125 Backbox
BackBox for the miniDSP PWR-ICE plate amplifier series. HighlightsRemoveable wall mounting brackets ready for quick installation Provides internal wires for cabling to the speaker binding postsCompact designPerfect fit to mount a PWR-ICE on a wall, or simply at the back of a speakerPredrilled mounting and connection holes Product details miniDSP PWR-ICE125 Backbox The PWR-ICE Backbox is a metal back box for the miniDSP PWR-ICE series. Provided with internal wiring + speaker bindings and brackets for wall mounting. Available for the PWR-ICE125 or PWR-ICE250, it's the perfect fit to mount a PWR-ICE on a wall, or simply at the back of a speaker.This product offering doesn't include the PWR-ICE amplifier module. Contains1 x metal backbox1 x set of removable brackets for wall mounting1 x set of internal wires for cabling to the speaker binding postsShow more Show lessminiDSP UMA-16 USB Mic Array
The miniDSP UMA-16 v2 is the updated version of our sixteen-channel microphone array with plug&play USB audio connectivity. With its onboard XMOS interface, the UMA-16 is the perfect fit for the development of beam-forming algorithms or your DIY acoustic camera. Highlights Multichannel USB microphone array for voice command16 channels of RAW audio for development of custom beamforming algorithmsHigh quality MEMS from Knowles SPH1668LM4HUSB to PDM conversion for up to 16 x PDM MEMS microphonesCenter Hole for USB camera (Not provided)Sample Matlab code to get started Product details  MiniDSP UMA-16 USB Mic Array Its system architecture consists of two core elements:- A microphone PCB with 16 x Knowles SPH1668LM4H MEMS microphones in a uniform rectangular array (URA). A center hole fits an optional USB camera for applications such as acoustic cameras. The microphone PCB is a simple 2-layer design that can easily be customized to your needs by following our schematics included in the user manual.- Stacked on top of the mic array is the MCHStreamer Lite USB interface. This XMOS XCORE interface allows for a high quality PDM to PCM conversion and presents all 16 channels of raw audio to the USB interface. What's in the box?1 x UMA-16 USB microphone array interface1 x 1.5m USB miniUSB cable1 x 12V power supply with EU/UK/US plugs Access to the UserDownloads section for ASIO drivers/Firmware updates once the product purchased. Show more Show lessminiDSP Phoenix to XLR Female
Phoenix to XLR female connector for the input section of the miniDSP 10x10 HD and DDRC-88A. HighlightsPre-assembled4x 30cm high quality balanced signal cableEasily extendible with XLR to XLR cables Product details miniDSP Phoenix to XLR Female Set This product is for a set (i.e. total 4x XLR connectors) of Phoenix to XLR Female adaptor. This adaptor cable allows easy interfacing to XLR connection for the input section of the following products:miniDSP 10x10 HDminiDSP DDRC-88A Cable is about 30 cm long. If one requires a longer cable to connect to its amplifier, you could easily connect an XLR to XLR patch cable.Show more Show lessminiDSP PWR-ICE250 ICEpower Plate Amplifier
2x250W @ 4Ω or 1 x 500W @ 8Ω DSP plate amplifier, Powered by ICEpower® 250ASX2 module, Ethernet control, FIR + IIR filter HighlightsDSP Powered plate amplifier with FIR + IIR filtersPowered by ICEpower® technology for 2x250W @ 4Ω or 1 x 500W @ 8ΩWindows & Mac compatible, IP control over Ethernet/WifiAnalog & Digital inputMulti-unit control via EthernetPerfect fit for 2way active speakers or Subwoofer plate amplifier Product details PWR-ICE250 2 x 250 Watt DSP ICEpower Plate AmplifierNote: This product comes with a coupon (€9,50) for one free miniDSP plugin download.Introducing the PWR-ICE250, a DSP powered plate amplifier module for active 2 way loudspeakers or mono subwoofers. Result of the collaborative effort of two innovative technology companies, the PWR-ICE250 core features include:On the processing side is miniDSP's innovative software & firmware allowing a Plug & Play real time control of the onboard DSP over Ethernet/Wifi networks. Using our Zero Conf technology, multiple modules are automatically discovered and controlled from a single User interface in real time. The platform is supported under Mac and Windows environment.The onboard Digital Signal Processors (DSP) provide real time all the processing a speaker designers will expect to excel at his crossover design task. These include FIR + IIR filters, Parametric Equalizers (PEQ), Level, crossovers, comp/limiter, delay and more. The Graphical User Interface (GUI) platform is supported on both Mac and Windows environment.On the power amplifier side, the ICEpower® 250ASX2 modules are complete AC plug-to-speaker amplification audio solutions offering flexible two-channel or bridgeable speaker drive. Their compact size, audiophile audio quality and high power output make them perfect for high-performing audio products. The amplifier is rated for up to 2x250W @ 4Ω or 1 x 500W @ 8ΩAs for audio connectivity, the PWR-ICE250 is fitted with both analog balanced (XLR) & unbalanced inputs (RCA) to provide maximum compatibility. A digital input (AES-EBU/SPDIF) saves on the A-D conversion for maximum performance while a Digital output (AES-EBU/SPDIF) allows multiple plate amplifiers to be linked to each other. What's in the box?1 x PWR-ICE250 amplifier module1 x CAT5 patch cable1 x IEC power cord4 x black wood screws for mounting1 x Speaker wire harness to connect amplifier to speaker (60cm long)1 x Coupon code for miniDSP plugin download System Diagram Mechanical Specifications Show more Show lessminiDSP PWR-ICE250 Backbox
BackBox for the miniDSP PWR-ICE plate amplifier series. HighlightsRemoveable wall mounting brackets ready for quick installation Provides internal wires for cabling to the speaker binding postsCompact designPerfect fit to mount a PWR-ICE on a wall, or simply at the back of a speakerPredrilled mounting and connection holes Product details The PWR-ICE Backbox is a metal back box for the miniDSP PWR-ICE series. Provided with internal wiring + speaker bindings and brackets for wall mounting. Available for the PWR-ICE125 or PWR-ICE250, it's the perfect fit to mount a PWR-ICE on a wall, or simply at the back of a speaker.This product offering doesn't include the PWR-ICE amplifier module. Contains1 x metal backbox1 x set of removeable brackets for wall mounting1 x set of internal wires for cabling to the speaker binding postsShow more Show lessminiDSP SHD Studio All Digital Dirac Live 2×4 processor (Digital, Streamer)
Product descriptionPros and consAccording to our specialistsDirac Live® Digital Room CorrectionFlexibility in connecting, a variety of digital and analogue inputs and outputsSupports a wide range of audio formats and streaming servicesThe Dirac Live Calibration Tools software is only compatible with the UMIK-1 microphone Some technical knowledge and skills required to use it optimallyProduct descriptionIntroducing: the SHD Studio (“Streaming High Definitionâ€) digital audio processor incorporating Dirac Live®, the world's premier room correction solution! While physically the SHD Studio is the “baby brother†of the full-featured SHD — accomplished by removing the analog I/O connectors and circuitry — internally it packs the same powerful audio processing capabilities.The miniDSP SHD Studio is an all in One Streaming processor with Dirac Live® Digital Room Correction, Volumio Network streamer, All Digital interface (AES-EBU/SPDIF/TOSLINK/USB), 450MHz Sharc DSP processor, Headphone amplifier and DSP toolbox for subwoofer or multiway speaker.We supply the miniDSP SHD Studio with a coupon (worth €9,50) for one free miniDSP plugin download. Highlights miniDSP SHD StudioProcessor: 32-bit floating-point 450MHz Analog Devices SHARC DSPPowered by Dirac Live® Digital Room CorrectionQuad core ARM processor for network audio streaming - Preloaded with VolumioInputs: Stereo digital channels (USB Audio/AES-EBU/SPDIF/Optical)Outputs: Dual Stereo digital channels (2 x stereo SPDIF RCA outputs and 2 x stereo AES-EBU Balanced XLR) / Headphone amplifierWhite/Black OLED front panel controllerCertified Roon Ready Product details miniDSP SHD StudiominiDSP SHD Studio All in One Streaming Processor Quad-core ARM processor for streaming with EthernetminiDSP has included network streaming over Ethernet, using a dedicated quad-core ARM processor. Out of the gate, the miniDSP SHD Studio comes with Volumio, a popular open-source network streamer. Volumio gives you access to music files from sources as diverse as a USB stick, to files stored on your local network, to Internet Radio and Spotify. ApplicationsThe SHD Studio includes a suite of our powerful but user-friendly DSP audio tuning software - ten-band parametric EQ per channel, crossovers up to 48 dB/octave, compressor/limiter, and a 2x4 matrix mixer. Applications range from integrating a single subwoofer to a two-way active speaker. Outputs 3 and 4 also drive the headphone jack on the front panel for a uniquely flexible digital processing solution. Roon ReadyThe miniDSP SHD Series processors are certified Roon Ready players. This means that they are certified by Roon Labs to work seamlessly with the Roon software running on your PC, Mac, or Linux-based server! Roon streaming technology stands for an incredible user interface, simple setup, rock-solid daily reliability, and the highest levels of audio performance, without compromise.Note: To use Roon, you will need to have a paid account with Roon Labs. Your miniDSP SHD Series includes a free two-month trial. What's included with this product?Dirac Series Audio Processor — SHD DSPUSB Wifi 2.4GHz adaptorIR remoteIEC power plug (UK/EU/US) Note: This product comes with a coupon (€9,50) for one free miniDSP plugin download.Note: The Dirac Live Calibration Tools for miniDSP software is only compatible with the UMIK-1 microphone for measurement.  Frequently Asked QuestionsCan I use my own measurement microphone to make measurements with Dirac Live?The UMIK-1/2 are measurement microphones approved by Dirac Research. Knowing the major effect a wrong calibration/measurement would have on the final results of Dirac Live tuning, we strongly recommend that you select a UMIK-1/2 microphone together with your platform for a plug&play experience leading to best results. Any issues related to 3rd party microphones such as ASIO/USB audio driver incompatibility/Latency problems or incorrect calibration process will not be under our support structure by our support team.  How do I use the digital output for subwoofers?The best way is to connect a second DAC to the OUT3&4 digital output on the SHD Studio. Why do I get distortion when I turn on Dirac Live?Usually, this is caused by over-boosting. Remember that all EQ requires additional headroom. In the case of Dirac Live, it will boost by up to 10 dB, so if you run your SHD at 0 dB volume with a digital input (e.g. in the case where you control volume in the amplifier instead of in the SHD), then you will certainly get a clipping of the output signal. If you experience distortion, reduce the level in the SHD to less than -10, and increase the gain on the amplifier accordingly.Show more Show less Frequently bought togetherminiDSP UMIK-1 SHD Studio All Digital Dirac Live 2x4 processor (Digital, Streamer) + UMIK-1 Measurement Microphone Normally:€ 1.209,90You save: € 50,-Combideal:€ 1.159,90 Add to cartminiDSP U-DIO8 Multichannel USB to AES-EBU or SPDIF interface
Multichannel USB to AES-EBU OR SPDIF interface for up to 8ch input & outputs, USB asynchronous with up to 192kHz, Sample Rate Conversion on all inputs, Standard TASCAM DB25 connectivity.  Highlights5.1/7.1 USB audio interfaceBroadcasting/Studio/Live Sound AES-EBU OR SPDIF interfaceMulti-room audio streaming Product details miniDSP UDIO-8Note: This product comes with a coupon (€9,50) for one free miniDSP plugin download.The miniDSP UDIO-8 is a pocket size USB Asynchronous interface with support for up to 8 channels of audio recording and 8 channels of playback. Inputs and outputs are digital and available in 2 versions (AES/EBU or SPDIF). A standard TASCAM pinout DB-25 connector to XLR (AES-EBU version) or DB25 to RCA (SPDIF version) is used for connectivity. Thanks to 8 channels of high quality sample rate converters on all inputs, the UDIO-8 supports recording of any input rate (44.1~192k). On the output side, the digital output matches the playback sample rate selected in the driver.The UDIO-8 is an ideal solution for high-resolution multi-channel audio, computer-based (HTPC) home theater, live sound, surround-sound mixing and mastering. NOTE: To insure correct impedance matching, note that UDIO comes in two versions. (AES-EBU or SPDIF) with different internal PCB assemblies. Please make sure to select the correct format you'd like to use.    What's in the box?1 x U-DIO8 USB audio interface1 x DB25 to XLR cable OR dB25 to RCA cable1 x 1.5m USB type B cable1 x 5V universal power supply with US/UK/EU/AU plug1 x Coupon code for miniDSP plugin download for ASIO drivers/Firmware updates Show more Show lessminiDSP WI-DG Wifi/Ethernet to USB bridge
Wifi/Ethernet to USB bridge, 2.4GHz router, Support for Amazon Alexa skill, 5V USB powered. Highlights4GHz b/g/n Wifi Router (Access point/Station Mode)Ethernet/Wifi control of miniDSP platforms over plugin/appsSupport for voice control via miniDSP's Amazon Alexa SkillMany supported plugins Product details miniDSP WI-DGThe WI-DG is a Wifi/Ethernet to USB bridge that is pre-configured for Plug&Play discovery and control over IP networks. The Wi-DG is a tiny adaptor that interfaces to the USB port of a miniDSP hardware unit and acts as a Wi-Fi to USB bridge. Supported miniDSP plugins transparently detect and communicate with the miniDSP via the Wi-DG, enabling control and configuration over the network. Normally, the computer running the appropriate miniDSP plugin is connected directly to the miniDSP hardware unit using a USB cable. With the Wi-DG, however, the computer connects using Wi-Fi in 2 possible modes of operations: Station mode or Access Point mode. Please check out the user manual for more details.The WI-DG also supports Amazon Alexa voice control via MiniDSP's free Alexa Skill. Yet another way to easily control your audio.Note: The WIDG is only compatilbe with miniDSP plugins. Unfortunately it can't be used with Dirac Live software for control.   What's in the box?1 x WI-DG interface1 x 1m microUSB cable1 x USB power supply with US/UK/EU plugs (removed on 17May2021) Supported plugins (IP field & Self discovery)miniDSP 2x4HD, DDRC-24, miniDSP 2x8/8x8/4x10/10x10, nanoDIGI 2x8, C-DSP 6x8, C-DSP 8x12, miniSHARC series, nanoSHARC series, OpenDRC series, DDRC-22 series, DDRC-88A/D, nanoAVR HD/HDA, SHD series, Flex and Flex Eight.Supported platforms for Alexa voice controlSHD, 2x4HD, DDRC-24, miniDSP 2x8/8x8/4x10/10x10, nanoDIGI 2x8, C-DSP 6x8, C-DSP 8x12, miniSharc series, nanoSHARC, OpenDRC series, DDRC-22 series, DDRC-88A/D, nanoAVR HD/HDA Show more Show lessminiDSP Phoenix to XLR Male
Phoenix to XLR male connector for outputs of the miniDSP 2x8, 8x8, 4x10 HD, 10x10 HD, DDRC-88A HighlightsPre-assembled4x 30cm high quality balanced signal cableEasily extendible with XLR to XLR cables Product details miniDSP Phoenix to XLR Male Set This product is for a set (i.e. total 4x XLR connectors) of Phoenix to XLR Male adaptor. This adaptor cable allows easy interfacing to XLR connection for the output section of the following products:miniDSP 2x8miniDSP 8x8miniDSP 4x10 HDminiDSP 10x10 HDminiDSP DDRC-88A Cable is about 30 cm long. If one requires a longer cable to connect to its amplifier, you could easily connect an XLR to XLR patch cable.Show more Show lessminiDSP PWR-ICE125 ICEpower Plate Amplifier
2x125W @ 4Ω or 1 x 450W @ 4Ω DSP plate amplifier, Powered by ICEpower® 125ASX2 module, Ethernet control, FIR + IIR filters HighlightsDSP Powered plate amplifierFIR + IIR filter options (please consult manual for details)Powered by ICEpower® technology for 2x125W @ 4Ω or 1 x 450W @ 4ΩWindows & Mac IP controlAnalog & Digital inputMulti-unit control via Ethernet Product details PWR-ICE125 2 x 125 Watt DSP ICEpower Plate AmplifierNote: This product comes with a coupon (€9,50) for one free miniDSP plugin download.Introducing the PWR-ICE125, a DSP powered plate amplifier module for active 2 way loudspeakers or mono subwoofers. Result of the collaborative effort of two innovative technology companies, the PWR-ICEs series key features are: On the processing side is miniDSP's innovative software & firmware allowing a Plug & Play real time control of the onboard DSP over Ethernet/Wifi networks. Using our Zero Conf technology, multiple modules are automatically discovered and controlled from a single User interface in real time. The onboard Digital Signal Processors (DSP) provide real time all the processing a speaker designers will expect to excel at his crossover design task. These include FIR and IIR filters (biquad input), Parametric Equalizers (PEQ), level, crossovers, comp/limiter, delay and more. The Graphical User Interface (GUI) platform is supported on both Mac and Windows environment.On the power amplifier side, the ICEpower® modules are complete AC plug-to-speaker amplification audio solutions offering flexible two-channel or bridgeable speaker drive. Their compact size, audiophile audio quality and high power output make them perfect for high-performing audio products. The amplifier is rated for up to 2x125W @ 4Ω or 1 x 450W @ 4Ω.As for audio connectivity, the PWR-ICE125 is fitted with both analog balanced (XLR) & unbalanced inputs (RCA) to provide maximum compatibility. A digital input (AES-EBU) saves on the A-D conversion for maximum performance while a Digital output (AES-EBU) allows multiple plate amplifiers to be linked to each other. What's in the box?1 x PWR-ICE125 amplifier module1 x CAT5 patch cable1 x IEC power cord4 x black wood screws for mounting1 x Speaker wire harness to connect amplifier to speaker (60cm long)1 x Coupon code for miniDSP plugin download System DiagramShow more Show lessminiDSP UMIK-X-4 USB Multichannel microphone array
USB Multichannel microphone array, Up to 16ch audio recording, A2B wiring allows daisy-chaining of multiple arrays, REW integration for multichannel-analysis HighlightsMultichannel - Multipoint Microphone measurement systemUp to 4xUMA4 MEMS microphone arrays can be daisy-chainedLow Distortion, High AOP, High SNR Knowles MEMS (SPH0655LM4H-1)24bit 44.1/48kHz recording, ASIO driversUSB to A2B® module for multichannel audio streaming over long cables (up to 40m)REW license for Multichannel measurement Product details miniDSP UMIK-X-4 USB Multichannel microphone array The UMIK-X consists of one to four UMA4 microphone modules and a USB-A2B interface to interface the modules to the computer. Between four and 16 microphones can therefore be connected. UMA4 modules are daisy-chained to each other using a single twisted-pair cable carrying Analog Devices A2B protocol for multichannel audio at 24-bit/44.1 or 48 kHz. A single cable for audio + power for up to 40m distance! Applications include environmental monitoring and distributed sound field measurement. The distributed omnidirectional microphones in the array allow quick measurement and analysis in applications such as room equalization and distributed subwoofer tuning. The UMIK-X is a UAC-2 compliant interface that comes with its own ASIO driver and is driverless for macOS and Linux. For Windows, an ASIO driver is provided. Last but not least, the UMIK-X is compatible with the new multi-channel measurement capability of Room EQ Wizard (v5.20 and up). While this is normally a paid upgrade, a license for the upgrade is already included with your purchase. The UMIK-X is now available for sale in 2 complete, ready to go packages to get up and running in no time! The basic package supports 16 channel recording (4 x UMA4 arrays). What's in the box?1 x USB to A2B interface for multichannel audio streaming / Multichannel USB audio streaming1 x License Code for Multichannel Audio Measurement with REW (100 USD worth)1 x shielded USB cable (2m)A2B Twisted pair cable for microphone module daisy chainning: 2 x UMA4/XL package (1 x 5m, 1 x 3m , 1 x 5cm), 4 x UMA4/XL package (1 x 5m, 3 x 3m , 2x 5cm)Linking brackets to link 2 x UMA-4 microphone arrays together (if option selected) PRODUCT SPECIFICATIONSItem: USB to A2B interfaceDescriptionUSB streaming engine XMOS Multicore USB audio processor for UAC2 streamingUSB audio capabilitiesUSB audio recording for up to 16ch audio channelsDriverless under OSx, LinuxCustom ASIO drivers for Win10 platformsResolution / Sample rate24bit @ 44.1/48 kHzAnalog devises A2B linkMultichannel audio link via A2B protocol, Up to 40m long cableToslinkToslink Out: Stereo link to Playback system / Toslink In: No enabledLEDPower/Active link indicationPower supplyExternal 5V USB power supplyDimensions / Weight24x64x67mm / 90g Item: UMA-4 Microphone ModuleDescriptionAnalog devises A2B linkMultichannel audio link via A2B protocol. Dual-port for Daisy chain up to 4 x UMA4MEMS microphones4 x Knowles MEMS with low noise buffer and high-performance modulator:Low distortion: 1% @ 130 dB SPLSensitivity: -37dBFS @ 94dB SPL (1kHz)Acoustic Overload Point (AOP): 132.5dB SPLHigh SNR: 66 dBA and flat frequency responseRF shielded against mobile interferenceOmnidirectional pick-up patternMatched sensitivity for uniform responseMountingPlastic clamp for microphone mountingDimensions (mm) / Weight160x180mm / 27gShow more Show lessminiDSP UMIK-X-2 Multichannel microphone array
USB Multichannel microphone array, Up to 8ch audio recording, A2B wiring allows daisy-chaining of multiple arrays, REW integration for multichannel-analysis HighlightsMultichannel - Multipoint Microphone measurement systemUp to 2xUMA4 MEMS microphone arrays can be daisy-chainedLow Distortion, High AOP, High SNR Knowles MEMS (SPH0655LM4H-1)24bit 44.1/48kHz recording, ASIO driversUSB to A2B® module for multichannel audio streaming over long cables (up to 40m)REW license for Multichannel measurement Product details miniDSP UMIK-X-2 USB Multichannel microphone array The UMIK-X consists of one to two UMA4 microphone modules and a USB-A2B interface to interface the modules to the computer. Between four and 16 microphones can therefore be connected. UMA4 modules are daisy-chained to each other using a single twisted-pair cable carrying Analog Devices A2B protocol for multichannel audio at 24-bit/44.1 or 48 kHz. A single cable for audio + power for up to 40m distance! Applications include environmental monitoring and distributed sound field measurement. The distributed omnidirectional microphones in the array allow quick measurement and analysis in applications such as room equalization and distributed subwoofer tuning. The UMIK-X is a UAC-2 compliant interface that comes with its own ASIO driver and is driverless for macOS and Linux. For Windows, an ASIO driver is provided. Last but not least, the UMIK-X is compatible with the new multi-channel measurement capability of Room EQ Wizard (v5.20 and up). While this is normally a paid upgrade, a license for the upgrade is already included with your purchase. The UMIK-X is now available for sale in 2 complete, ready to go packages to get up and running in no time! The basic package supports up to 8 x Channel recording (2 x UMA4 arrays). What's in the box?1 x USB to A2B interface for multichannel audio streaming / Multichannel USB audio streaming1 x License Code for Multichannel Audio Measurement with REW (100 USD worth)1 x shielded USB cable (2m)A2B Twisted pair cable for microphone module daisy chainning: 2 x UMA4/XL package (1 x 5m, 1 x 3m , 1 x 5cm), 4 x UMA4/XL package (1 x 5m, 3 x 3m , 2x 5cm)Linking brackets to link 2 x UMA-4 microphone arrays together (if option selected) PRODUCT SPECIFICATIONSItem: USB to A2B interfaceDescriptionUSB streaming engine XMOS Multicore USB audio processor for UAC2 streamingUSB audio capabilitiesUSB audio recording for up to 16ch audio channelsDriverless under OSx, LinuxCustom ASIO drivers for Win10 platformsResolution / Sample rate24bit @ 44.1/48 kHzAnalog devises A2B linkMultichannel audio link via A2B protocol, Up to 40m long cableToslinkToslink Out: Stereo link to Playback system / Toslink In: No enabledLEDPower/Active link indicationPower supplyExternal 5V USB power supplyDimensions / Weight24x64x67mm / 90g Item: UMA-4 Microphone ModuleDescriptionAnalog devises A2B linkMultichannel audio link via A2B protocol. Dual-port for Daisy chain up to 4 x UMA4MEMS microphones4 x Knowles MEMS with low noise buffer and high-performance modulator:Low distortion: 1% @ 130 dB SPLSensitivity: -37dBFS @ 94dB SPL (1kHz)Acoustic Overload Point (AOP): 132.5dB SPLHigh SNR: 66 dBA and flat frequency responseRF shielded against mobile interferenceOmnidirectional pick-up patternMatched sensitivity for uniform responseMountingPlastic clamp for microphone mountingDimensions (mm) / Weight160x180mm / 27gShow more Show lessminiDSP UMIK-2 USB Reference Measurement Microphone
Product descriptionPros and consAccording to our specialistsUMIK-2 has a better dynamic range than UMIK-1Compatible with both Windows and Mac operating systems The UMIK-2 is delivered calibrated and corrected No physical buttons, control via software No built-in wind protectionProduct descriptionReference measurement microphone with low noise floor, 32-bit ADC with selectable sample rate and unique calibration file. HighlightsSuitable for reference applications Unique calibration file for each microphone1/2" capsule detachable through 60 UNS threadADC with 32-bit resolution and selectable sample rate between 44.1 and 192 kHzCustom Windows ASIO drivers and Plug&Play on Linux/Mac OS XLow noise floor preamps, 120DR ADCPlug&Play compatibility with REW & Dirac Live Product details miniDSP UMIK-2 USB Reference Measurement Microphone The miniDSP UMIK-2 is a high performance measurement microphone from our test and measurement category. The UMIK-2 is developed by miniDSP as improvement on the popular UMIK-1, one of SoundImports's best selling products. The UMIK-2 is equipped with a large 13mm microphone capsule for a reduced noise floor and improved distortion performance. The microphone is powered through USB-C and has driverless support on OS X and Linux. MiniDSP developed a custom ASIO driver for easy integration with Microsoft Windows. The inbuilt ADC, with a 32-bit resolution, converts the measured signal while retaining high quality. The UMIK-2 is recommended by REW (Room Equalisation Wizard) and DiracLive (V3.x and later) for the highest measurement accuracy. The selectable sample rate (44.1 to 192 kHz) allows for easy integration with most other measurement and recording software. What's in the box?1 x UMIK-2 microphone1 x shielded USB type C cable (2m)1 x Mini Tripod + Mic Clamp1 x windscreen Unique Calibration File DownloadEach UMIK-2 has an unique calibration file. You can download this calibration file from miniDSP with the serial number from your device.  FAQQ: What are the main differences between the UMIK-1 and the UMIK-2?A: The UMIK-2 is improved on analog, digital and functional aspects compared the UMIK-1. The larger capsule enables better noise and distortion performance. The improved analog performance is preserved by the high quality ADC. The new USB interface allows for easy software controllable settings, such as gain control and sample rate selection. Q: There are two different calibration files available for download, which one should I use?A: For measuring a single speaker or a stereo pair, you use the ‘0deg' calibration file. The capsule should be pointed at the speakers. For measuring a surround system or multichannel application, you use the 90deg calibration file. The capsule should be pointed at the ceiling Q: What software should I use for measurements?A: We recommend Room EQ Wizard (REW). This free room acoustics analysis software is perfect for measuring and analyzing room and loudspeaker responses. However, you can use any software that accepts a calibration file. Other examples are: ARTA, Smaart, Fuzzmeasure, and HolmImpulse Q: Can I use the UMIK-2 to measure impedance curves or acquire T/S parameters?A: The UMIK-2 measures an acoustic signal. Therefore you cannot use the UMIK-2 for T/S parameters or impedance measurements. The Dayton Audio DATS V3 is a perfect companion for acquiring T/S parameters. The Audiomatica CLIO Pocket 2.1 is a great alternative, that combines both acoustic and electrical signal measurements into one package. Show more Show lessminiDSP UMIK-1 acoustic USB measurement microphone
Product descriptionPros and consAccording to our specialistsThe UMIK-1 measuring microphone is highly accurate UCB-C, compatible with both Windows and Mac operating systemsAffordable, for professionals and hobbyists alikeNo physical buttons, controls via softwareNo built-in wind protectionProduct descriptionThe UMIK-1 is a highly regarded omni-directional measurement microphone designed for accurate audio measurements in various applications. Manufactured by miniDSP, the UMIK-1 is specifically engineered to provide precise and reliable measurements for acoustic analysis, room correction, speaker calibration, and other audio-related tasks. The UMIK-1 offers a combination of affordability and performance, making it an indispensable tool for anyone seeking to achieve optimal sound quality and accurate audio measurements. Highlights of the miniDSP UMIK-1Easy USB connectivityDriverless support on Windows, OS X & LinuxCalibrated SPL measurement enabled under free Room EQ Wizard (REW) softwareCompatible with all measurement softwareFlat response from 20 Hz to 20 kHz (+/-1dB) Product details miniDSP UMIK-1miniDSP UMIK-1 Omni-Directional USB Measurement Calibrated Microphone miniDSP UMIK-1 plug & play microphoneThe miniDSP UMIK-1 is a plug & play measurement microphone for both testing and measurment from our test and measurement category. This product is developed by miniDSP, a company that is specialized in consumer friendly DSP solutions. The UMIK-1 is perfect for acquiring frequency response data for designing speakers, measuring in room response for room correction or home theatre calibration and many more acoustic measurement applications. Next to its measurement skills, the UMIK-1 can also be used for recording. The miniDSP UMIK-1 is recommended by Dirac Live to acquire the right data for their Dirac Live Room Correction software. Its compact and user-friendly design, along with its compatibility with various measurement software and platforms, has made it a popular choice among audio enthusiasts, professionals, and researchers. Great compatibilityThe microphone is powered through USB and features an intergraded 24-bit ADC. This eliminates the need for a preamplifier or soundcard. Thanks to the USB Audio class 1 interface, there is driverless support for all major operating systems, such as Windows and Mac, and acoustic measurement software. Each microphone is supplied with a unique calibration file that ensures a flat frequency response from 20 Hz to 20 kHz.  Unique Calibration File DownloadAll UMIK-1 are calibrated with a unique calibration file. In addition, a unique auto-generated 90-degree calibration file for use with surround system applications. To download the calibration files, look for the 7 digit Serial Number found on the body of the microphone. The file can be downloaded here. What's included with this product?1 x UMIK-1 microphone1 x shielded USB cable (1.5m)1 x mini Tripod1 x foam windscreen FAQ about the miniDSP UMIK-1 What are the main differences between the UMIK-1 and the UMIK-2?The miniDSP UMIK-2 is improved on analog, digital and functional aspects compared to the UMIK-1. The larger capsule enables better noise and distortion performance. The improved analog performance is preserved by the high quality ADC. The new USB interface allows for easy software controllable settings, such as gain control and sample rate selection.  Can I use the UMIK-1 with a mobile device?You can connect the miniDSP UMIK-1 to an iPad or iPhone through a ‘lightning-to-USB-camera-adapter'. The compatibility with Android devices differs from brand to brand. There are two different calibration files available for download, which one should I use?For measuring a single speaker or a stereo pair, you use the ‘0deg' calibration file. The capsule should be pointed at the speakers. For measuring a surround system or multichannel application, you use the 90deg calibration file. The capsule should be pointed at the ceiling. What software do I use for measurements?We recommend using the Room EQ Wizard (REW) when you're performing an acoustics analysis. This free room acoustics analysis software is perfect for measuring and analysing room and loudspeaker responses. However, you can use any software that accepts a calibration file. Other examples are: ARTA, Smaart, Fuzzmeasure, and HolmImpulse Can I use the UMIK-1 to measure impedance curves or acquire T/S parameters?The miniDSP UMIK-1 measures an acoustic signal. Therefor, you cannot use the UMIK-1 for T/S parameters or impedance measurements. The Dayton Audio DATS V3 is a perfect companion for acquiring T/S parameters. The Audiomatica CLIO Pocket 2.1 is a great alternative, that combines both acoustic and electrical signal measurements into one package.Show more Show lessminiDSP UMA-8 Multichannel USB Microphone
Circular USB microphone array, DSP processing for Beamforming, AEC, Noise reduction, 2ch and 8ch mode, Live GUI control of advanced parameters. HighlightsMultichannel USB microphone array for voice commandOn-board DSP for beamforming/ noise reduction / echo cancellation / de-reverb / Direction of Arrival (DOA) / Voice Activity Detection (VAD)Ring with 11 LED RGBHigh quality MEMS from Knowles SPH1668LM4HSimple USB control API for Direction of ArrivalFlexible Firmware (DSP mode @2ch beamformed, RAW mode @8ch audio from MEMS)Step by step app notes for Alexa-Pi, Cortana, Siri and IBM Watson. More coming up soon... Product details miniDSP UMA-8 Multichannel USB MicrophoneNote: This product comes with a coupon (€9,50) for one free miniDSP plugin download.The UMA-8 is a high-performance yet low cost multichannel USB microphone array built around XMOS multicore technology. Seven high-performance MEMS microphones are configured in a circular arrangement to provide high-quality voice capture for a wide range of applications. Leveraging the on-board DSP processing, the UMA-8 supports voice algorithms including beamforming, noise reduction, acoustic echo cancellation and de-reverb. Non-technical users can enjoy a plug&play experience, while advanced users can fine-tune all DSP parameters with a real-time Win/Mac GUI for optimum performance. The UMA-8 is a fully compliant UAC2 audio interface with driverless support for Mac/Linux and ASIO drivers for Windows. From DIYers to OEM, this pocket-size platform is engineered for flexibility in firmware, software and hardware. Precompiled firmware versions, expansion connectors providing connectivity for additional PDM microphones, I2S in/out expansion and GPIO... It's all there to grow with your application! System Diagram   What's in the box?1 x UMA-8 USB microphone array interface1 x 1.5m USB type B cable1 x Coupon code for drivers/firmware/GUI.  Mechanical Specifications  PRODUCT SPECIFICATIONSItemDescriptionUSB streaming engine  XMOS XSVM 2000 - Multicore USB audio processor with embedded DSPUSB audio capabilities       USB audio recording in 2 possible modes depending on firmware:- 8-channel mode (7 x MEMS installed + 1 x spare PDM port in the center)- Stereo recording with DSP processing enabledUSB audio playback: Stereo I2S channel for I2S out (e.g. external amplifier/DAC board.)DSP processing (prebuilt firmware)     · Beamforming with configurable beam width (up to 20dB attenuation)· Perceptual acoustic echo cancellation (up to 80dB attenuation)· Noise suppression (up to 20dB attenuation)· De-reverb ( up to 20dB attenuation)· Manual mode for control of beam formingUAC2.0 drivers    Driverless interface for Mac OS X v10.6.4 and upThesycon Windows ASIO driver (All versions)Linux Alsa 2.0 compliantControl via HID interface for advanced settings and active microphoneResolution / Sample rate24bit @ 11/16/32/44.1/48 kHzI2S portOutput port for PDM to I2S conversion (upcoming firmware update required)MEMS microphones     7 x Knowles SPH1668LM4H with low noise buffer and high performance modulator· Low distortion: 1.6% @ 120 dB SPL· High SNR: 65 dB and flat frequency response· RF shielded against mobile interference· Ominidirectional pick-up patternLED12 x RGB LED / Bottom mounted - Circular light guide includedExpansion connector 2 x 12-pin, 2 mm pitch expansion connector for connectivity to hardware.XMOS JTAG connector for custom code.Power supplyUSB poweredDimensions (diameter) mm90 mm diameter / 20mm height with LED ring, 14mm height without LED ring  Show more Show lessminiDSP SHD Power | All In One Amplifier | Dirac Live calibration
Streaming All In One Amplifier with Dirac Live® Digital Room Correction, Volumio Network streamer, 2x120Wrms Amplifiers, 450MHz Sharc DSP processor, DSP toolbox for subwoofer or multiway speaker. HighlightsProcessor: 32-bit floating-point 450MHz Analog Devices SHARC DSP32bit Audiophile convertersProprietary custom 2 x 120W amplifier (8Ohms/4Ohms), SNR >110dB (at 1kHz A-weighted, 120W in 8Ω), Embedded PCM1795 DAC chipset + TPA3255 Class D chipsetPowered by Dirac Live® 2.0 Digital Room CorrectionQuad core ARM processor for network audio streaming - Preloaded with VolumioInputs: Stereo digital (USB Audio/AES-EBU/SPDIF/Optical)Outputs: 2 x 120W amplifier output , 2 x analog out (Unbalanced RCA), 4 x digital AES-EBUUSB audio recording feature (4xCH processed output via USB audio to record digital inputs)White/Black OLED front panel controller Product details MiniDSP SHD Power | All In One Amplifier | Dirac Live calibration MiniDSP is proud to introduce the latest member of the SHD (“Streaming High Definitionâ€) processor family. As with all SHD Series processors, the SHD Power includes Dirac Live®, the world's premier room correction so-lution, and a full suite of miniDSP's powerful but user-friendly audio tun-ing software. Dirac Live calibration uses our popular UMIK-1 microphone and Dirac's easy-to-use calibration tool. What's in the box: Dirac Series Audio Processor — SHD Power • USB Wifi 2.4GHz adaptor • Dirac Live license for miniDSP - Full Range correction • IR remote • IEC power plug (UK/EU/US) Show more Show less Frequently bought togetherminiDSP UMIK-1 SHD Power | All In One Amplifier | Dirac Live calibration + UMIK-1 Measurement Microphone Normally:€ 1.909,90You save: € 50,-Combideal:€ 1.859,90 Add to cartminiDSP IL-DSP | USB | DSP | DAC | Headphone Amplifier
Featuring a full ten bands of powerful, flexible parametric EQ in a tiny bus-powered package, the IL-DSP is the mobile audiophile's perfect companion for laptop, tablet, or smartphone (macOS, Windows and Android supported). HighlightsXMOS XCORE200 Multicore processor - Asynchronous USB audioCS43130 32bit DAC, 130dB DR, 0.0007%THD, 30mW power3 button control for various action depending on the mode(Play/Stop/Next/Previous/Vol Up/Vol Down/DSP on&off)On-board digital microphoneWin/Mac OSx pluginPCM/DSD audio streaming modesUSB Audio Class 2.0 with ASIO drivers for Windows, driverless under MAC OSx and Linux Alsa 2.0, Android OTG support Product details miniDSP IL-DSP | USB | DSP | DAC | Headphone Amplifier Note: This product comes with a coupon (€9,50) for one free miniDSP plugin download.miniDSP is pleased to announce the latest merger of miniDSP's trademark digital processing with high quality headphone amplification. Featuring a full ten bands of powerful, flexible parametric EQ in a tiny bus-powered package, the IL-DSP is the mobile audiophile's perfect companion for laptop, tablet, or smartphone (macOS, Windows and Android supported). The inbuilt microphone for voice-calling ensures maximum mobile flexibility.Housed in a light-weight aluminum enclosure, the IL-DSP sports impeccable audio specifications of 120 dB signal-to-noise ratio and 0.0007% THD+N (mid-gain). 30 mW power output per channel is ample for IEMs and most portable headphones. High-resolution PCM and DSD formats are both supported. The ten bands of parametric EQ are configured with miniDSP's easy-to-use computer interface. The fully adjustable peaking and shelving filters allow adjustment of the audio band from the narrowest to the broadest control ranges, with up to 16 dB boost or cut in each band. This combination of DSP power, careful selection of high-quality components and a 32-bit audiophile DAC combine to create an unparalleled portable headphone experience. What's in the box?1 x IL-DSP headphone amplifier1 x microUSB to USB Type C (15cm)1 x microUSB to USB C (70cm)1 x microUSB to USB A(15cm) 1 x cable clip1 x Coupon code for miniDSP plugin download and USB ASIO driver, Plugins Specifications Audio resolutionUp to 24 bitsInput sample rates (PCM)44.1, 48, 88.2, 96, 176.4, 192 kHzDirect-Stream Digital (DSD) inputDSD64/DSD128 (no DSP processing in DSD mode)Internal DSP processing44.1 or 48 kHz (depends on input sample rate)Frequency response20-20 kHz, +/-0.2 dBSignal-to-noise ratio120 dB (32 Ω, 1 kHz, A-weighted, digital in 0 dB)THD + Noise0.0007% (32 Ω, 1 kHz, 30 mW + 30 mW, mid gain)Power output100 30 mW + 30 mW (32 Ω, 1 kHz, digital in 0 dB)Dimensions (WxDxH)53 x17 x 9 mmWeight14.5 g Show more Show lessminiDSP Harmony 8×12 Car Amplifier with Dirac Live
Product descriptionPros and consAccording to our specialistsDirac Live correction (8 ch), matrix mixer, miniDSP processing on all 12 outputsExternal wired remote includedProduct descriptionDirac Live powered 12ch Car Amplifier, 32bit floating point SHARC ADSP21489 @ 400MHz, 8x12 I/O, USB/SPDIF/A2B, OLED Remote for Preset/Master & Sub volume control Array Highlights400MHz 32bit Sharc Floating point processorDirac Live technology helps tune your cabin environmentAll Digital amplifierUSB Audio (6ch), Toslink(2ch), A2B (future) digital inputs12 channel flexible amplifier for Mono/Bridged mode and Line OUT(driving external amps)Flexible DSP processing blocks, Rear Fill processing (L-R, L+R..) thanks to internal matrixWindows/Mac compatible GUIRemote control or preset/master & sub volume control Product details Harmony DSP 8x12 | Dirac Live | Car Amplifier miniDSP is proud to introduce the latest addition to its line of innovative car audio processors. The all-digital Harmony DSP 8x12 integrated DSP/amplifier features six-channels digital audio input via USB, stereo digital optical input (TOSLINK), Dirac Live® acoustic correction and 12 output channels. Hardware features dedicated to the vehicle environment include an on-board isolated power supply, remote trigger input/output, and a wired remote with OLED display for dash or console. Flexible output configurations cater to a wide variety of system configurations: each output can be a 40 Wrms power amplifier or a line-level output for driving external amplifiers. In addition, each pair of outputs can be configured in parallel BTL mode for 80 W output into 2 Ω loads. In addition to Dirac Live, the Harmony DSP 8x12 includes miniDSP's powerful, easy-to-use audio processing: parametric EQ, compressors, adjustable time delay, crossovers up to 48 dB/octave, and an advanced matrix mixer with rear/center capability. Four complete processing configurations are stored in flash memory for recall with a wired or infrared remote. What's in the Box?1 x Harmony 8x12 Car Amplifier1 x Dirac Live license2 x Speaker wiring harness1 x 1m USB cable1 x 5m remote cable + OLED Remote control moduleShow more Show lessminiDSP EARS Headphone Test Fixture
Calibrated headphone test fixture, low noise capsules, USB audio plug&play setup, Configurable jumpers HighlightsAffordable Headphone test jigPlug&play USB audio streaming for Win/Mac/LinuxSpecial features such as calibrated SPL measurement enabled under free Room EQ Wizard (REW) softwareFrequency response: 20 Hz - 20kHz +/-1dB with calibration loaded Product details EARSIntroducing "EARS", the Earphone Audio Response System. miniDSP EARS brings headphone measurement capability to "the masses" - it's just an extremely affordable measurement rig for headphones and IEMs that we've built using the same technology as our popular UMIK-1 calibrated measurement microphone. Alternatively one could use EARS as a binaural microphone with USB audio streaming. Each pair of EARS has two microphone capsules mounted in a minimal "dummy head". Measurement output is via the driverless USB connection. The EARS are powered from the USB so there is no need for an external power supply. To measure headphones, just mount your headphones on the rig and run a measurement sweep using your headphone amp and favorite measurement program (e.g. Room EQ Wizard). The supplied calibration file corrects for the response of the microphone capsule and the ear. The miniDSP EARS is the perfect tool for creating EQ filters for the miniDSP HA-DSP headphone amplifier or for any other headphone system with EQ capability. Unique Calibration File DownloadAll miniDSP EARS are calibrated with a unique calibration file. To download the calibration files, look for the 7 digit Serial Number found on the bottom of the EARS. All EARS are calibrated with unique left and right calibration files. One of the compensation types will also need to be chosen (see the User Manual for details). To download the calibration files, look for the 7 digit serial number found on the EARS unit. Enter the serial number at the product page of MiniDSP EARS. Your calibration files will automatically download in most browsers. If not, click on the links provided to manually download. What's in the box?1 x EARS test jig1 x shielded USB cable (1.5m) Show more Show lessminiDSP ambiMIK-1 USB Ambisonic Measurement Microphone | 32bit 192kHz ASIO Dirac
USB Ambisonic microphone, 32bit/44.1~192kHz, ASIO drivers, VST plugin powered by Dirac for A to B format and Binaural conversion. HighlightsFirst Order Ambisonic MicrophoneMultichannel USB audio32bit 44.1~192kHz recording, ASIO driversLow noise capsulesBinaural VST plugin powered by Dirac Research Product details MiniDSP ambiMIK-1 USB Ambisonic Measurement Microphone | 32bit 192kHz ASIO Dirac Introducing ambiMIK-1, an affordable First Order Ambisonic (FOA) microphone with embedded preamp, Analog to Digital converters (ADC) and USB processor. This compact solution enables high sample rates (up to 32bit/192kHz) in a portable package. With applications ranging from VR/AR & music recording, the ambiMIK-1 doesn't require any bulky external preamp or XLR cables. A simple USB cable to your tablet/laptop and you're ready to go! With its 4 low noise 14mm capsules, its slim aluminum body and nylon protective frame, the ambiMIK-1 package was engineered for durability and optimal performance without breaking the bank. Last but not least, miniDSP partnered with Dirac Research for the design of a VST plugin specifically calibrated for the ambiMIK-1 with over 1200 measurements. The controls include Yaw/Pitch/Roll/Output gain and Output Format (B format or Binaural). What's in the box: 1 x ambiMIK-1 microphone • 1 x shielded USB cable (2m) • 1 x mini Tripod • 1 x wind screen.Show more Show less
