Showing 1–20 of 75 resultsSorted by latest
GRS PT5010-FP Face Plate for PT5010-8
By attaching the GRS PT5010-8 planar tweeter to the PT5010-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project! HighlightsAluminum faceplate for the GRS PT5010-8 planar tweeterInstantly improve the looks of any projectDoes not effect output when installedAll mounting hardware includedTweeter not included Product details GRS PT5010-FP Face Plate for PT5010-8 Planar Tweeter By attaching the GRS PT5010-8 planar tweeter to the PT5010-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project!Show more Show lessGRS PT2522C-4 Planar Tweeter with Back Cup
With a low mass diaphragm and powerful motor, the GRS PT2522C-4 planar sealed back tweeter delivers high efficiency output with excellent transient response. The low profile sealed back allows this tweeter to be installed easily into conventional speakers without the need for a separate sub-enclosure. Remarkably smooth frequency response gives the PT2522C-4 an incredibly natural but dynamic sound. HighlightsExtremely low mass diaphragm provides excellent transient response and accuracyLarge diaphragm produces high efficiency and wide bandwidthMultiple neodymium magnets in push pull arrangement for incredible control and low distortionRemarkably flat response even at 30 degrees off axisLinear impedance simplifies crossover designShallow mounting depth for use in low profile designs Product details GRS PT2522C-4 3-1/2" Planar Tweeter with Back Cup 4 Ohm The GRS PT2522C-4 sealed back planar tweeter is designed to deliver high efficiency with extremely smooth response. Thanks to a lightweight damped Polyethylene Naphthalate film diaphragm that is driven by 6 powerful neodymium magnets in a push-pull arrangement, this driver is capable of incredible transient response and low distortion. The linear 3.4 ohm impedance makes crossover design simple and minimizes the number of components required to achieve your required roll off. In addition, the low profile sealed rear chamber isolates the rear side of the diaphragm for simple installation into conventional enclosures. The PT2522C-4 is a perfect choice for use as a drop in replacement in existing systems or for use in new designs where low distortion and accurate response is needed.Show more Show lessGRS PT6816-FP Face Plate for PT6816-8
By attaching the GRS PT6816-8 planar tweeter to the PT6816-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project! HighlightsAluminum faceplate for the GRS PT6816-8 planar tweeterSimple design for easy mountingInstantly improve the looks of any projectDoes not effect output when installedAll mounting hardware includedTweeter not included Product details GRS PT6816-FP Face Plate for PT6816-8 Planar Tweeter By attaching the GRS PT6816-8 planar tweeter to the PT6816-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project!Show more Show lessGRS PT6825-8 Planar Mid/Tweeter
Capable of delivering extremely wide bandwidth with low distortion, the GRS PT6825-8 open back planar driver is designed to deliver natural midrange response while remaining accurate to the highest frequencies. With an extremely lightweight diaphragm and a neodymium motor system, this driver is capable of excellent transient response with amazing dynamics. The open back construction produces true dipole radiation which is ideal for use in open baffle designs. HighlightsExtremely low mass diaphragm provides excellent transient response and accuracyLarge diaphragm produces high efficiency with incredible dynamicsRemarkably wide bandwidth for controlled transition to woofer and tweeter driversOpen back delivers true dipole radiation for use in open baffle designsLinear impedance simplifies crossover designShallow mounting depth for use in low profile designs Product details GRS PT6825-8 8" Planar Mid/Tweeter 8 Ohm With the ability to provide low distortion output from 500-20,000 Hz, the GRS PT6828-8 open back midrange/tweeter is an excellent choice for use in 2-way designs or even as a drop in replacement in many existing systems. Thanks to a lightweight damped polyimide diaphragm driven by 30 powerful neodymium magnets in a push-pull arrangement, this driver is capable of incredible transient response and detail. With a nearly linear 6.4 ohm impedance keeps crossover design simple with predictable final results. In addition, the open back design gives this midrange/tweeter true dipole radiation making it the perfect choice for use in high end open baffle speaker designs.Show more Show lessGRS PT6825-FP Face Plate for PT6825-8
By attaching the GRS PT6825-8 Planar tweeter to the PT6825-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project! HighlightsAluminum faceplate for the GRS PT6825-8 planar tweeterSimple design for easier flush mountingInstantly improve the looks of any projectDoes not effect output when installedAll mounting hardware includedTweeter not included Product details GRS PT6825-FP Face Plate for PT6825-8 Planar Tweeter By attaching the GRS PT6825-8 Planar tweeter to the PT6825-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project!Show more Show lessGRS PZ1005 Replacement Piezo Horn Tweeter
Finally, an affordable drop-in replacement for those vintage KSN1005A piezos! GRS piezo tweeters are built using a 22 mm ceramic piezo element, to the original CTS specifications. HighlightsPerfect replacement for many classic loudspeakersNo crossover required - great for simple, economical designsFrequency response into the ultrasonic rangeGreat for super tweeter applications in DJ/Karaoke systemsEqual or superior to products being sold for 8-10 times our price!22 mm ceramic piezo element that follows original CTS specs Product details                      GRS PZ1005 3-1/4" Piezo Horn Tweeter Similar to KSN1005A The GRS PZ1005 is specifically designed and engineered to be a replacement for the very popular KSN1005A piezo tweeters from days gone by. Using a 22 mm ceramic piezo element, GRS piezo tweeters follow CTS' original recipe and are far superior to most look-alike piezos. With a wide frequency range and ample power handling, this is also a prime candidate for new designs, especially if the crossover requirements must be kept to an absolute minimum. Specifications: SPL: 94 dB 1W/1m • Dimensions: A: 3-1/4", B: 3-1/16", C: 2-1/2".Show more Show lessGRS PZ1016 Replacement Piezo Horn Tweeter
Finally, an affordable drop-in replacement for those vintage KSN1016A piezos! GRS piezo tweeters are built using a 22 mm ceramic piezo element, to the original CTS specifications. HighlightsPerfect replacement for many classic loudspeakersNo crossover required - great for simple, economical designsFrequency response into the ultrasonic rangeGreat for super tweeter applications in DJ/Karaoke systemsEqual or superior to products being sold for 8-10 times our price!22 mm ceramic piezo element that follows original CTS specs Product details                      GRS PZ1016 2" x 5" Piezo Horn Tweeter Similar to KSN1016A The GRS PZ1016 is specifically designed and engineered to be a replacement for the very popular KSN1016A piezo tweeters from days gone by. Using a 22 mm ceramic piezo element, GRS piezo tweeters follow CTS' original recipe and are far superior to most look-alike piezos. With a wide frequency range and ample power handling, the PZ1016 is also a prime candidate for new designs, especially if the crossover requirements must be kept to an absolute minimum. Specifications: SPL: 92 dB 1W/1m • Dimensions: A: 5-3/4", B: 2-3/4", C: 2".Show more Show lessGRS RT1.0-8 Ribbon Tweeter
GRS's premium "Hi-Res" ribbon tweeters with the latest in materials and motor technology easily reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system! Highlights2.5kHz to 40kHz frequency response for true "Hi-Res" detailPowerful neodymium magnets deliver high efficiency and incredible dynamicsRemarkably thin ribbon diaphragm provides accurate transient detailHigh sensitivity for increased SPL OutputBuilt-in grill protects the delicate ribbon from fingers and other foreign objectsOptional silver faceplate available Product details GRS RT1.0-8 Hi-Res Neo Ribbon Tweeter 8 Ohm GRS has released a line of premium "Hi-Res" ribbon tweeters employing the latest in materials and motor technology> The GRS Hi-Res Ribbon Tweeters effortlessly reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system. This is achieved by employing incredibly light and thin diaphragms, high grade neodymium motor and attention to detail in the assembly process.The GRS Hi-Res Ribbon Tweeters are perfect for those looking for the "Hi-Res" detail in their loudspeaker system!As audio technology improves beyond the imagination of the last generation, GRS is here to keep you up to spec! With a diaphragm thickness of 0.03mm made from pure aluminum foil, the GRS Hi-Res Neo Ribbon Tweeters take advantage of the latest in materials and motor technology to bring you a tweeter that plays faithfully up to 40kHz!Show more Show lessGRS RT1.R-8 Ribbon Tweeter
GRS's premium "Hi-Res" ribbon tweeters with the latest in materials and motor technology easily reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system! Highlights2.5kHz to 40kHz frequency response for true "Hi-Res" detailPowerful neodymium magnets deliver high efficiency and incredible dynamicsRemarkably thin ribbon diaphragm provides accurate transient detailHigh sensitivity for increased SPL OutputBuilt-in grill protects the delicate ribbon from fingers and other foreign objectsOptional silver faceplate available Product details RT1.R-8 Hi-Res Neo Ribbon Tweeter 8 Ohm GRS has released a line of premium "Hi-Res" ribbon tweeters employing the latest in materials and motor technology> The GRS Hi-Res Ribbon Tweeters effortlessly reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system. This is achieved by employing incredibly light and thin diaphragms, high grade neodymium motor and attention to detail in the assembly process.The GRS Hi-Res Ribbon Tweeters are perfect for those looking for the "Hi-Res" detail in their loudspeaker system! The GRS Neo Ribbon Tweeters have an extended frequency response that reaches up to 40kHz, this allows the tweeter to provide better transient detail and less roll-off at 20kHz than you'd normally get with typical tweeters. The relatively flat impedance curve also makes crossover design incredibly simple, with no awkward loads to work around! As audio technology improves beyond the imagination of the last generation, GRS is here to keep you up to spec! With a diaphragm thickness of 0.03mm made from pure aluminum foil, the GRS Hi-Res Neo Ribbon Tweeters take advantage of the latest in materials and motor technology to bring you a tweeter that plays faithfully up to 40kHz!Show more Show lessGRS PRT-8 Replacement Phenolic Ring Tweeter
At last, a faithful reproduction of the classic "phenolic ring" tweeter developed by CTS and used by Marantz, Altec, Martin, Acoustic Research and many others! HighlightsModern reproduction of the famous CTS design used by Marantz, Altec, and many othersHigh efficiency and smooth responseRestore your classic speaker system from the Seventies! Product details GRS PRT-8 Phenolic Ring Tweeter Replacement for AR-4X CTS Marantz and More 8 Ohm At last, a faithful reproduction of the classic "phenolic ring" tweeter developed by CTS and used by Marantz, Altec, and many others! High efficiency and smooth, extended response. Extremely versatile; great for repairing older systems or for new custom projects. Low-mass paper cone and dust cap, 3/4" voice coil, and stamped steel faceplate. 8 ohm nominal impedance. This is a drop in replacement for the Marantz Imperial Series cabinet speakers models Marantz Imperial 4, 5, 6, 6G, 7, 8, and 9 with common part numbers 137-7348N, 137-7350, 137-7816, and 841-1022 and HLM312A. Also used in Radio Shack Nova series cabinets Nova 7b as well as the Altec Lansing Santana 891 speakers, RSL Rogersound Labs, Acoustic Research AR 4x, Martin Speakers, and Rectilinear XI Cabinets from the 70's.Show more Show lessGRS PT2522-4 Planar Tweeter
With a low mass diaphragm and powerful motor, the GRS PT2522-4 planar back tweeter delivers high efficiency output with excellent transient response. The open back construction produces true dipole radiation which is ideal for use in open baffle designs. Smooth frequency response and low distortion gives the PT2522-4 an incredibly natural but dynamic sound. HighlightsExtremely low mass diaphragm provides excellent transient response and accuracyLarge diaphragm produces high efficiency and wide bandwidthRemarkably flat response even at 30 degrees off axisOpen back delivers true dipole radiation for use in open baffle designsLinear impedance simplifies crossover designShallow mounting depth for use in low profile designs Product details GRS PT2522-4 3-1/2" Planar Tweeter 4 Ohm The GRS PT2522-4 open back planar tweeter is designed to deliver high efficiency with dynamic response. Thanks to a lightweight damped Polyethylene Naphthalate film diaphragm that is driven by 6 powerful neodymium magnets in a push-pull arrangement, this driver is capable of incredible transient response and low distortion. The linear 3.4 ohm impedance makes crossover design simple and minimizes the number of components required to achieve your required roll off. In addition, the open back design gives this tweeter true dipole radiation making it the perfect choice for use in open baffle speaker designs. The PT2522-4 is a perfect choice for use as a drop in replacement in existing systems or for use in new designs where low distortion and accurate response is needed.Show more Show lessGRS RT3.0-8 Ribbon Tweeter
GRS's premium "Hi-Res" ribbon tweeters with the latest in materials and motor technology easily reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system! Highlights2.3kHz to 40kHz frequency response for true "Hi-Res" detailPowerful neodymium magnets deliver high efficiency and incredible dynamicsRemarkably thin ribbon diaphragm provides accurate transient detailHigh sensitivity for increased SPL OutputBuilt-in grill protects the delicate ribbon from fingers and other foreign objectsOptional silver faceplate available Product details GRS RT3.0-8 Hi-Res Neo Ribbon Tweeter 8 Ohm GRS has released a line of premium "Hi-Res" ribbon tweeters employing the latest in materials and motor technology> The GRS Hi-Res Ribbon Tweeters effortlessly reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system. This is achieved by employing incredibly light and thin diaphragms, high grade neodymium motor and attention to detail in the assembly process.The GRS Hi-Res Ribbon Tweeters are perfect for those looking for the "Hi-Res" detail in their loudspeaker system! The GRS Neo Ribbon Tweeters have an extended frequency response that reaches up to 40kHz, this allows the tweeter to provide better transient detail and less roll-off at 20kHz than you'd normally get with typical tweeters. The relatively flat impedance curve also makes crossover design incredibly simple, with no awkward loads to work around! As audio technology improves beyond the imagination of the last generation, GRS is here to keep you up to spec! With a diaphragm thickness of 0.03mm made from pure aluminum foil, the GRS Hi-Res Neo Ribbon Tweeters take advantage of the latest in materials and motor technology to bring you a tweeter that plays faithfully up to 40kHz!Show more Show lessGRS PT2522-FP Face Plate for PT2522-4 & PT2522C-4
By attaching the GRS PT2522-4 or PT2522C-4 planar tweeter to the PT2522-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project! HighlightsAluminum faceplate for the GRS PT2522-4 and PT2522C-4 planar tweetersSimplifies the complicated profile of the PT2522/C for easy mountingInstantly improve the looks of any projectDoes not effect output when installedAll mounting hardware includedTweeter not included Product details GRS PT2522-FP Face Plate for PT2522-4 and PT2522C-4 Planar Tweeters By attaching the GRS PT2522-4 or PT2522C-4 planar tweeter to the PT2522-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project!Show more Show lessGRS PT6816-8 Planar Tweeter
Capable of delivering wide bandwidth with low distortion, the GRS PT6816-8 open back planar driver has the ability to perform well from upper midrange to the highest frequencies. With an extremely lightweight diaphragm and a neodymium motor system, this driver is capable of excellent transient response with amazing dynamics. The open back construction produces true dipole radiation which is ideal for use in open baffle designs. With a narrow footprint and minimal flange, the PT6816-8 is also ideal for line array use. HighlightsExtremely low mass diaphragm provides excellent transient response and accuracyNarrow design to deliver excellent off axis consistencyMultiple neodymium magnets in push pull arrangement for incredible control and low distortionOpen back delivers true dipole radiation making this driver ideal for open baffle line array designsLinear impedance simplifies crossover designShallow mounting depth for use in low profile designs Product details GRS PT6816-8 8" Planar Slim Tweeter 8 Ohm The GRS PT6816-8 open back planar midrange/tweeter is designed to deliver low distortion with dynamic response. Thanks to a lightweight damped polyimide diaphragm that is driven by 18 powerful neodymium magnets in a push-pull arrangement, this driver is capable of incredible transient response and wide bandwidth. The almost linear 6.4 ohm impedance makes crossover design simple and minimizes the number of components required to achieve your required roll off. In addition, the open back design gives this tweeter true dipole radiation making it the perfect choice for use in open baffle speaker designs. With wide dispersion capabilities and minimal mounting flange, the PT6816-8 is an excellent choice for use in high output line arrays.Show more Show lessGRS PT5010-8 Planar Mid/Tweeter
Capable of delivering extremely wide bandwidth with low distortion, the GRS PT5010-8 open back planar driver is designed to deliver natural midrange response while remaining accurate to the highest frequencies. With an extremely lightweight diaphragm and a neodymium motor system, this driver is capable of excellent transient response with amazing dynamics. The open back construction produces true dipole radiation which is ideal for use in open baffle designs. HighlightsExtremely low mass diaphragm provides excellent transient response and accuracyLarge diaphragm produces high efficiency with incredible dynamicsRemarkably wide bandwidth for predictable transition to woofer and tweeter driversOpen back delivers true dipole radiation for use in open baffle designsLinear impedance simplifies crossover designShallow mounting depth for use in low profile designs Product details GRS PT5010-8 10" Planar Mid/Tweeter 8 Ohm With the ability to provide low distortion output from 300-8,000 Hz, the GRS PT5010-8 open back midrange/tweeter is an excellent choice for use in 2-way designs or even as a drop in replacement for many existing systems. Thanks to a lightweight damped Polyethylene Naphthalate film diaphragm driven by 56 powerful neodymium magnets in a push-pull arrangement, this driver is capable of incredible transient response and detail. With a nearly linear 6.8 ohm impedance keeps crossover design simple with predictable final results. In addition, the open back design gives this midrange/tweeter true dipole radiation making it the perfect choice for use in high end open baffle speaker designs.Show more Show lessGRS PZ1025 Replacement Piezo Horn Tweeter
Finally, an affordable drop-in replacement for those vintage KSN1025 piezos! GRS piezo tweeters are built using a 22 mm ceramic piezo element, to the original CTS specifications. HighlightsPerfect replacement for many classic loudspeakersNo crossover required - great for simple, economical designsFrequency response into the ultrasonic rangeGreat for super tweeter applications in DJ/Karaoke systemsEqual or superior to products being sold for 8-10 times our price!22 mm ceramic piezo element that follows original CTS specs Product details                      GRS PZ1025 2" x 6" Piezo Horn Mid/Tweeter Similar to KSN1025 The GRS PZ1025 is specifically designed and engineered to be a replacement for the very popular KSN1025 piezo tweeters from days gone by. Using a 22 mm ceramic piezo element, GRS piezo tweeters follow CTS' original recipe and are far superior to most look-alike piezos. With a wide frequency range and ample power handling, this is also a prime candidate for new designs, especially if the crossover requirements must be kept to an absolute minimum.Specifications: Width: 7-1/4" • Height: 3-1/10"• Depth: 4"Show more Show lessGRS PZ1165 Replacement Piezo Horn Tweeter
Finally, an affordable drop-in replacement for those vintage KSN1165A piezos! GRS piezo tweeters are built using a 22 mm ceramic piezo element, to the original CTS specifications. This 60 watt RMS driver incorporates protective circuitry which allows it to handle 400 watts of continuous power. HighlightsPerfect replacement for many classic loudspeakersNo crossover required - great for simple, economical designsFrequency response into the ultrasonic rangeInternal protection circuitry handles up to 400 watts of continuous powerEqual or superior to products being sold for 8-10 times our price!22 mm ceramic piezo element that follows original CTS specs Product details                      GRS PZ1165 4-3/8" Piezo Horn Tweeter Similar to KSN1165A The PZ1165 is specifically designed and engineered to be a replacement for the very popular KSN1165A piezo tweeters from days gone by. Using a 22 mm ceramic piezo element, GRS piezo tweeters follow CTS' original recipe and are far superior to most look-alike piezos. With a wide frequency range and ample power handling, this is also a prime candidate for new designs, especially if the crossover requirements must be kept to an absolute minimum. Specifications: Power handling: 60 watts RMS, 120 watts (internal protection circuitry dissipates up to 400 watts) • Dimensions: A: 4-1/4", B: 4-1/16", C: 3".Show more Show lessGRS B25-4 Replacement Dome Tweeter Matched Pair
The GRS B25-4 1" titanium dome tweeter pair is the ideal drop in replacement tweeter for many popular BMW vehicles. The included angled mounting pod aims the tweeter for optimum response when installed into factory locations. With a rigid titanium dome, cloth surround, and strong neodymium magnet the B25-4 will produce incredible detail with low distortion. HighlightsThe ultimate drop in upgrade tweeter for many popular late model BMW modelsIncludes inline 6 dB per octave filter for protection against low frequenciesAngled mounting pod designed for ideal listening angle from factory locationsFerrofluid cooled voice coil for high power handling and improved dampingPerfect match for the GRS B100-4 BMW 4" drivers Product details GRS B25-4 ASD Series 1" Titanium Dome Tweeter Pair Upgrade Set for Select BMW Models Designed specifically as a drop in upgrade for common BMW tweeters, the GRS B25-4 1" titanium dome tweeter delivers smooth response along with incredible accuracy and detail. This tweeter features an extremely small but powerful neodymium motor providing ideal control and high efficiency to ensure accurate response. The 1" titanium dome is rigid and lightweight for excellent transient response. Thanks to the cloth surround and Ferrofluid damping, any harsh resonances have been pushed well outside of the audible range. For installation, the B25-4 includes angled mounting pods that helps to provide an ideal listening angle from the usual door and dash mounting locations. In addition, a high quality 4.7 uF polypropylene capacitor is wired in line with the included wiring harness creating a 6 dB per octave high pass at 8,000 Hz to provide ample protection from low frequencies. Note: Sold in pairs. Show more Show lessGRS BT3-8 Bullet Tweeter
Super quality bullet tweeter with wide dispersion angle. Heavy duty magnet structure provides increased power handling capability. Highlights60° x 60° dispersion pattern for even responseCommon 2.75" mounting hole, ideal as a replacement tweeterControlled 60° x 60° dispersion pattern for even response Product details GRS BT3-8 3-3/8" Bullet Tweeter Super quality bullet tweeter with wide dispersion angle. Heavy duty magnet structure provides increased power handling capability.GRS Silver Faceplate for Fountek/ribbon tweeters | RT1.0-8
By attaching the GRS RT1.0-8 to the RT1.0-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project! HighlightsAluminum faceplate for the GRS RT3.0-8 tweetersInstantly improve the looks of any projectDoes not affect output when installedTweeter not included Product details RT1.0-FP Silver Faceplate for Fountek/ribbon tweeters | RT1.0-8 By attaching the GRS RT1.0-8 ribbon tweeter to the RT1.0-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any projectShow more Show less
