Showing 1–20 of 525 resultsSorted by latest
- SaleSave -21%
Dayton Audio RS150T-8 6″ Reference Woofer Truncated Frame SALE
Dayton Audio Reference Series RS150T-8 6" woofers deliver exceptional clarity, detail, and dynamics—and of course, incredibly low distortion. HighlightsTruncated cast frame - great for line arrays and MTM speaker designsLong-excursion motor and suspension for strong bass performanceAdvanced low-distortion motor designLightweight black anodized aluminum cone Product details Dayton Audio RS150T-8 6" Reference Woofer Truncated Frame The Dayton Audio Reference Series sets a new standard of value in high-performance loudspeaker drivers. Utilizing a low-distortion motor system with two short-circuit paths and a rigid aluminum cone, the Reference Series can outperform drivers that cost several times the price. Their low-distortion characteristics and high excursion capabilities provide exceptional clarity, detail, and dynamics. Woofer features a black anodized cone, heavy-duty cast frame, low-loss rubber surround, solid aluminum phase plug, rubber magnet boot, and gold terminals.Show more Show less - SaleSave -30%
Dayton Audio DS175-PR 6-1/2″ Passive Radiator SALE
The Dayton Audio DS175-PR 6-1/2" passive radiator is excellent general-purpose radiator which allows lower tuning frequencies in smaller enclosures, suitable for replacement or for new construction. HighlightsLong-throw suspension system for clean excursionRugged stamped frame design with rear spider for stabilityDurable coated paper cone and rubber surroundM5 threaded hole simplifies adding mass for lower tuning frequency Product details Dayton Audio DS175-PR 6-1/2" Passive Radiator The Dayton Audio DS175-PR 6-1/2" passive radiator is an excellent general-purpose radiator suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, the passives match the Designer Series line of drivers, with a poly coated paper cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from floor standing two-ways to small active/passive subwoofer systems. Recommended for use in passive radiator enclosure alignments with active drivers from 3" to 6.5" in diameter. Dual passive radiators are recommended for use with 6.5" active drivers. Specifications: • Fs: 30.2 Hz • Vas: 0.61 cu. ft. • Qms: 1.8 • Cms: 0.74 mm/N • Mms: 37.5 g • Sd: 128.7 sq. cm. • Xmax: 8 mm • Dimensions: Overall diameter: 6.94", Cutout diameter: 5.63", Depth: 1.88" Note: Adding mass to the passive radiator will decrease Fs and increase Qms. Tip: As a general rule the passive radiator(s) should be able to move double the volume of air as the active woofer(s)/subwoofer(s) in the system. For example: A passive radiator system for a 6-1/2" woofer/subwoofer that has 8 mm of X-max would require 2-6-1/2" passive radiators with 8 mm of X-max. For single passive radiator systems, it is common to use a passive that is larger than the active woofer(s)/subwoofer(s).Show more Show less - SaleSave -36%
Dayton Audio DA175-8 7″ Aluminum Cone Woofer SALE
7" aluminum cone woofer with rubber surround, flat spider, and special composite dustcap. HighlightsSpecial composite dustcapStamped steel frame provides a very high-class and professional lookAluminum cone offers a flat frequency response in the passband region with very low distortion Product details Dayton Audio DA175-8 7" Aluminum Cone Woofer 7" aluminum cone woofer with rubber surround, flat spider, and special composite dustcap. The cosmetic stamped steel frame provides a very high-class and professional look to your next speaker design. The aluminum cone offers a flat frequency response in the passband region with very low distortion. Dayton Audio DC28FS-8 Dome Tweeter
Shielded version of the famous Dayton Audio Silk Dome Tweeter. 1-1/8" silk dome with ferrofluid cooling and fully shielded motor structure. HighlightsOffers smooth and detailed high frequency performanceMagnetically shieldedFerrofluid cooled voice coil Product details Dayton Audio DC28FS-8 1-1/8" Silk Dome Shielded Tweeter The shielded version of the famous Dayton Audio Silk Dome, this tweeter offers the same performance but in a CRT-safe design. Features a 1-1/8" silk dome with a ferrofluid cooled voice coil for superior damping. Compare it to drivers costing $30 to $40 more! Recommended for crossover points as low as 1,800 Hz, making it ideal for most 2-way speaker designs. 5 year warranty. Specifications: • Power handling: 50 watts RMS/100 watts max • VCdia: 1.14" • Le: 0.09 mH • Impedance: 8 ohms • Re: 5.6 ohms • Frequency range: 1,600-20,000 Hz • Fs: 813 Hz • SPL: 89 dB 1W/1m • Qms: 1.97 • Qes: 1.6 • Qts: 0.88 • Dimensions: Overall diameter: 4.33", Cutout diameter: 3.07", Depth: 1.42".Show more Show lessDayton Audio DC28F-8 Dome Tweeter
The Dayton Audio DC28F-8 1-1/8" silk dome tweeter's nearly unbeatable cost-to-performance ratio makes it a favorite, best-selling product. The "Silkie" is found in many, many successful loudspeaker projects!  HighlightsSmooth, extended responseTreated silk domeDamped rear chamber lowers resonanceFerrofluid cooled voice coilSounds like tweeters costing far more!Great replacement for the Dayton Audio DC28FS-8 1-1/8" Silk Dome Shielded Tweeter Product details Dayton Audio DC28F-8 1-1/8" Silk Dome Tweeter The famous "Silkie" – Dayton Audio's DC28F-8 1-1/8" Silk Dome Tweeter! Superior European design and performance at a fraction of the cost of similar audiophile high frequency transducers! Clinically tested and compared to Morel with amazingly similar results! Recommended for crossover points as low as 1,800 Hz!Show more Show lessDayton Audio DC28FT-8 Dome Tweeter
Superior European design and performance at a fraction of the cost of similar audiophile silk dome tweeters! HighlightsSame performance specs as the popular DC28F "Silkies"Truncated faceplates permit close driver spacingDamped rear chamber makes low crossover points possibleTreated silk dome offers smooth response with airy highsMatches or exceeds the performance of many high-dollar tweetersExtremely popular for DIY projects; used in many designs Product details Dayton Audio DC28FT-8 1-1/8" Silk Dome Truncated Tweeter Superior European design and performance at a fraction of the cost of similar audiophile silk dome tweeters! Clinically tested and compared to Morel with amazingly similar results! Recommended for crossover points as low as 1800 Hz!Show more Show lessDayton Audio DC25T-8 Dome Tweeter
Features a ferro fluid cooled aluminum voice coil and a rubber surround. The 1" titanium dome and precision phase lens, provide very natural sounding high frequency reproduction. HighlightsGreat replacement for the Dayton DC25TS-8 1" Titanium Dome Shielded Tweeter Product details Dayton Audio DC25T-8 1" Titanium Dome Tweeter Features a ferro fluid cooled aluminum voice coil and a rubber surround. The 1" Titanium dome and precision phase lens, provides very natural sounding high frequency reproduction.Dayton Audio SSWB6 speaker stand pair with wooden base
Dayton Audio's wood speaker stands are a strong choice to hold bookshelf speakers, desktop speakers or studio monitors. HighlightsStable, elegant solution to maintaining speaker heightFoam isolation pads keep speakers from sliding while also improving acoustic performanceHigh quality medium density fiber core construction minimizes resonance Product details Dayton Audio SSWB6 6" Speaker Stand Pair with Wooden BaseDayton Audio speaker stands are the ideal accessory to your home theater or stereo sound system, raising the speaker to the optimum listening height while providing a sturdy foundation. To reduce resonance, these speaker stands are constructed from high quality medium density fiber board and for additional isolation a filler medium can be placed inside the column of the stand.  Specifications:Height: 6" Base Dimensions: 9" (W) x 11-3/4" (D)Platform Dimensions: 7-1/4" (W) x 9-1/4" (D)Weight Limit: 130 lbs. (60 kg).Show more Show lessDayton Audio SSMB24 speaker stand pair with steel base
Dayton Audio's SSMB24 three tube speaker stand design has two 1.5" tubes in front and one 3" tube in the rear and the entire stand is completed in durable black crinkle finish.  HighlightsStable, classy solution to mainting proper speaker heightThree tube design: two 1.5" tubes and one 3" tubeSpeaker wire hidden in rear tubeNeoprene pads for speaker stability Product details Dayton Audio SSMB24 24" Speaker Stand Pair Square Steel Base Dayton Audio speaker stands are the ideal accessory to your home theater or stereo sound system, raising the speaker to the optimum listening height while providing a sturdy foundation. The three tube design has two 1.5" tubes in front and one 3" tube in the rear and the entire stand is completed in durable black crinkle finish. The rear tube hides the speaker cable from sight and can be filled for added mass. The top plate features neoprene pads to keep the speakers stable and the bottom plate features adjustable spikes for leveling and isolation. Platform is 16.8 x 20.9 cm and measures 0.95 cm thick. The bottom plate measures 20.9 x 27.9 cm and has a gentle taper to 12.7 cm at the back. The stand is 62.9 cm tall, has a weight capacity of 34 kg. and weighs 13 kg. per pair.Show more Show lessDayton Audio SSMB32 speaker stand pair with steel base
Dayton Audio's SSMB32 three tube speaker stand design has two 1.5" tubes in front and one 3" tube in the rear and the entire stand is completed in durable black crinkle finish. HighlightsStable, classy solution to maintaining proper speaker heightThree tube design: two 1.5" tubes and one 3" tubeSpeaker wire hidden in rear tubeNeoprene pads for speaker stability  Product details Dayton Audio SSMB32 32" Speaker Stand Pair Square Steel Base Dayton Audio speaker stands are the ideal accessory to your home theater or stereo sound system, raising the speaker to the optimum listening height while providing a sturdy foundation. The three tube design has two 1.5" tubes in front and one 3" tube in the rear and the entire stand is completed in durable black crinkle finish. The rear tube hides the speaker cable from sight and can be filled for added mass. The top plate features neoprene pads to keep the speakers stable and the bottom plate features adjustable spikes for leveling and isolation. Platform is 6-3/4" x 8-1/4" and measures 3/8" thick. The bottom plate measures 8-1/4" x 11" and has a gentle taper to 6" at the back. The stand is 32-3/4" tall, has a weight capacity of 34 kg. Show more Show lessDayton Audio ST601-4 Bullet Tweeter Pair
The ST601-4 from Dayton Audio was designed to articulate and reinforce the high-frequency output of any professional loudspeaker. With a great price-to-performance ratio, you would be hard-pressed to find a better driver to keep on hand! HighlightsHigh sensitivity output designed for pro audio duty1" titanium diaphragm for a detailed responseCompact Size to fit in the tightest spaces for smaller boxes5,600Hz crossover point is perfect for 3-way designsEasily adds detail to any existing system Product details                                                                      ST601-4 60W Titanium Shallow Mount Bullet Tweeter Pair The ST601-4 from Dayton Audio was designed to articulate and reinforce the high-frequency output of any professional loudspeaker. With a great price-to-performance ratio, you would be hard-pressed to find a better driver to keep on hand! The Dayton Audio ST601-4 is a supertweeter that can keep up with many midrange drivers. By taking advantage of its high-frequency response, you can add air and clarity to any PA system! The Dayton Audio ST601-4 has a high sensitivity to keep up with the demands of live audio. An output sensitivity of 106dB means the ST601-4 can add detail to even the most sensitive PA cabinets. When installed, the high-frequency output of the ST601-8 provides a clear and airy experience for every audience member in the crowd! Dayton Audio created the ST601-4 to provide a reliable replacement option with a response that comfortably integrates with existing designs, all at a great value. These features also put the speaker designer at an advantage, allowing for a large variety of possible combinations when choosing drivers for their own projects!Show more Show lessDayton Audio ST603-4 Bullet Tweeter Pair
The ST603-4 from Dayton Audio was designed to articulate and reinforce the high-frequency output of any professional loudspeaker. With a great price-to-performance ratio, you would be hard-pressed to find a better driver to keep on hand! HighlightsHigh sensitivity output designed for pro audio duty1" titanium diaphragm for a detailed responseCompact Size to fit in the tightest spaces for smaller boxes6,100Hz crossover point is perfect for 3-way designsEasily adds detail to any existing system Product details                                                                      ST603-4 60W Titanium Bullet Tweeter Pair The ST603-4 from Dayton Audio was designed to articulate and reinforce the high-frequency output of any professional loudspeaker. With a great price-to-performance ratio, you would be hard-pressed to find a better driver to keep on hand! The Dayton Audio ST603-4 is a supertweeter that can keep up with many midrange drivers. By taking advantage of its high-frequency response, you can add air and clarity to any PA system! The Dayton Audio ST603-4 has a high sensitivity to keep up with the demands of live audio. An output sensitivity of 106dB means the ST603-4 can add detail to even the most sensitive PA cabinets. When installed, the high-frequency output of the ST603-8 provides a clear and airy experience for every audience member in the crowd! Dayton Audio created the ST603-4 to provide a reliable replacement option with a response that comfortably integrates with existing designs, all at a great value. These features also put the speaker designer at an advantage, allowing for a large variety of possible combinations when choosing drivers for their own projects!Show more Show lessDayton Audio TD25F-4 Dome Tweeter
Dayton Audio's TD25F-4 1†soft dome tweeter is ideal for adding natural high frequency response to cost effective projects. Capable of handling a crossover frequency as low as 2,000 Hz (@ 12 dB/octave), the TD25F-4 makes a great choice for use in compact 2-way designs. Highlights1†silk dome delivers high efficiency and smooth responseSemi-horn loaded faceplate protects the dome while controlling off-axis responseLow Fs for use with crossovers as low as 2,000 Hz (@12 dB/octave)Perfect choice for use in budget 2-way designs Product details Dayton Audio TD25F-4 1" Soft Dome Tweeter 4 Ohm With a 1†silk dome the TD25F-4 from Dayton Audio produces smooth and natural high frequency output. The semi-horn loaded faceplate helps to control the off-axis response while recessing the dome for extra protection. An Fs of 900 Hz makes this tweeter suitable for use with a crossover as low as 2,000 Hz for an easy transition to most 6-1/2†woofers. The TD25F-4 is an excellent choice for use in cost effective, but high performance, 2-way speaker systems.Show more Show lessDayton Audio SPA1000 Subwoofer Plate Amplifier
The Dayton Audio SPA1000 subwoofer amplifier provides nearly a kilowatt of clean, reliable audio power—just what you need to get big sound out of large, low-efficiency subwoofer speaker systems. HighlightsHigh power Class-AB output stage for clean, controlled outputPatented tracking downconverter power supply for high efficiencyToroidal power supply transformerLow frequency parametric EQ allows you to boost or cut for custom-tailored soundAdvanced soft clip circuitry improves headroom and protects woofersOTC™ (Optimized Thermal Circuit) protects your plate amplifier from potential heat damageHercules heat sinks dissipate and control heat for extreme reliability Product details Dayton Audio SPA1000 1000W Subwoofer Plate Amplifier The Dayton Audio SPA1000 is one of the most technologically advanced subwoofer amplifiers on the market today! The Dayton Audio SPA1000 subwoofer amplifier is based on a state-of-the-art Class-G circuit topology that combines the proven high power, high fidelity characteristics of a Class-AB amplifier with a patented tracking down converter power supply to achieve an operating efficiency up to 86%. You get the efficiency of a Class-D amplifier without compromising audio quality and reliability. The Class-AB output stage provides the clean and low-distortion sound that audiophiles demand, without any of the instability problems that plague other high-efficiency amplifier designs. This American-designed and engineered amplifier uses patented circuitry that continuously tracks the input signal to modulate or control the voltage available to the output stage. This "tracking" capability delivers the exact amount of power based on demand instead of constantly keeping it in reserve, so the output stage only draws the amount of power that is required at any given time. Less energy is wasted as heat, and more power is available for the subwoofer driver. With its enhanced thermal management, the SPA1000 is an upgrade over previous models—making it a nearly bulletproof amplifier choice for today's demanding HT audio and music playback applications.Show more Show lessDayton Audio TPD-520 Trigger USB-C PD Output Voltage Controller
Turn any USB-C PD charger into a 9 to 20 VDC output power supply for small audio boards and other electronic devices with Dayton Audio's TDP-520 trigger board. The board delivers up to 100W of power depending on your PD charger's capability.  HighlightsDelivers up to 20 VDC from a smartphone USB-C PD charger to devices that don't have smart charge capabilitySwitches between 5, 9, 12, 15 and 20 VDC output to match your devices specificationInput supports PD3.0/2.0, BC1.2 and other fast charging protocolsStandard USB-C port connection for long lasting compatibilityHeat dissipation through PCB copper eliminates the need for a fan or heatsinkManual voltage output setting stays at the desired level even though power is removed Product details Dayton Audio TPD-520 Trigger USB-C PD Output Voltage Controller  Turn Your Smartphone PD Charger into a 5 to 20 VDC Power SupplyThis board is a highly cost-effective voltage trigger that controls your PD charger's output to match 5 different voltages (5V, 9V, 12V, 15V, 20V). The trigger has built-in USB PD protocol, supporting PD3.0/2.0, BC1.2 and other fast charging methods. It has a PD communication module which enables it to increase voltage to power various types electrical equipment, such as wireless charger, electric toothbrushes, small amplifier and preamplifier boards, rechargeable shaver, electric tools with lithium batteries and so on. It doesn't support QC technology which usually has a USB-A port. To select the correct voltage output, hold the button down on the board for 3 seconds and an LED will start flashing. If one LED flashes it's set for 5 VDC. To change the voltage output, push the button while the LED is flashing until the desired voltage LED is flashing. Wait 3 seconds and the voltage is set and the LEDs will stop flashing and you'll get a solid LED next to the desired voltage. If all the LEDs are flashing, it'll be set for 20 VDC when the flashing stops. Specifications: • Max voltage input and output 20 VDC • Max current output: 5A • Selectable output voltages when using PD AC USB-C adapter: 5, 9, 12, 15, 20 VDC • Dimensions: 2" W x 0.75" D x 0.51" H (51 x 19 x 13 mm) • Input port: USB-C • Output connectors: Phoenix style two screw terminals and 2-terminal Molex style micro-fit.Show more Show lessDayton Audio SPA500 Subwoofer Plate Amplifier
The Dayton Audio SPA500 Subwoofer Amplifier delivers the efficiency of a Class-D design, without compromising audio quality and reliability. HighlightsHigh power Class-AB output stage for clean, controlled outputPatented tracking downconverter power supply for high efficiencyToroidal power supply transformerLow frequency parametric EQ allows you to boost or cut to custom-tailor soundAdvanced soft clip circuitry improves headroom and protects woofersOTC™ (Optimized Thermal Circuit) protects amplifier from potential heat damageHercules heat sinks dissipate and control heat for extreme reliability Product details Dayton Audio SPA500 500W Subwoofer Plate Amplifier One of the most technologically advanced subwoofer amplifiers on the market today! The Dayton Audio SPA500 subwoofer amplifier is based on a state-of-the-art Class-G circuit topology that combines the proven high power, high fidelity characteristics of a Class-AB amplifier with a patented tracking down converter power supply to achieve an operating efficiency up to 86%. You get the efficiency of a Class-D amplifier without compromising audio quality and reliability. The Class-AB output stage provides the clean and low-distortion sound that audiophiles demand, without any of the instability problems that plague other high-efficiency amplifier designs. This American-designed and engineered amplifier uses patented circuitry that continuously tracks the input signal to modulate or control the voltage available to the output stage. This "tracking" capability delivers the exact amount of power based on demand instead of constantly keeping it in reserve, so the output stage only draws the amount of power that is required at any given time. Less energy is wasted as heat, and more power is available for the subwoofer driver. With its enhanced thermal management, the SPA500 is an upgrade over previous models—making it a nearly bulletproof amplifier choice for today's demanding HT audio and music playback applications.Show more Show lessDayton Audio SSWB20 speaker stand pair with wooden base
Dayton Audio's wood speaker stands are a strong choice to hold bookshelf speakers, desktop speakers or studio monitors. With two different platform sizes in each package, foam isolation pads, rubber feet and metal carpet spikes, these speaker stands are perfect for any environment. HighlightsStable, elegant solution to maintaining speaker heightLarge or small top platforms included to best match any speaker sizeFoam isolation pads keep speakers from sliding while also improving acoustic performanceHigh quality medium density fiber core construction minimizes resonanceChoice of included rubber feet or metal spikes make the stand easy to place on any surface Product details Dayton Audio SSWB20 20" Speaker Stand Pair with Wooden Base Dayton Audio speaker stands are the ideal accessory to your home theater or stereo sound system, raising the speaker to the optimum listening height while providing a sturdy foundation. To reduce resonance, these speaker stands are constructed from high quality medium density fiber board and for additional isolation a filler medium can be placed inside the column of the stand. Many other stands only offer one large platform to place your speakers so small speakers look out of place, or large speakers don't fit. Dayton Audio wood speaker stands come with two different size speaker bases all speakers will look and sound great. Included foam isolation pads can also be placed on the speaker base to further decouple your speakers from the floor. Dayton Audio wood speaker stands also come with two options for feet on the bottom of the stand. Rubber feet are perfect for hard floors such as wood or tile, and Metal floor spikes will keep the stands from moving on carpet. Keep your setup organized by hiding your cables on the back side of the stand with the included cable ties and adhesive mounts. Specifications: Height: 20" • Base Dimensions: 9" (W) x 11-3/4" (D) • Platform Dimensions (small): 7-1/4" (W) x 9-1/4" (D) • Platform Dimensions (large): 9" (W) x 11-3/4" (D) • Weight Limit: 130 lbs. (60 kg).Show more Show lessDayton Audio SSWB28 speaker stand pair with wooden base
Dayton Audio's wood speaker stands are a strong choice to hold bookshelf speakers, desktop speakers or studio monitors. With two different platform sizes in each package, foam isolation pads, rubber feet and metal carpet spikes, these speaker stands are perfect for any environment. HighlightsStable, elegant solution to maintaining speaker heightLarge or small top platforms included to best match any speaker sizeFoam isolation pads keep speakers from sliding while also improving acoustic performanceHigh quality medium density fiber core construction minimizes resonanceChoice of included rubber feet or metal spikes make the stand easy to place on any surface Product details Dayton Audio SSWB28 28" Speaker Stand Pair with Wooden Base Dayton Audio speaker stands are the ideal accessory to your home theater or stereo sound system, raising the speaker to the optimum listening height while providing a sturdy foundation. To reduce resonance, these speaker stands are constructed from high quality medium density fiber board and for additional isolation a filler medium can be placed inside the column of the stand. Many other stands only offer one large platform to place your speakers so small speakers look out of place, or large speakers don't fit. Dayton Audio wood speaker stands come with two different size speaker bases all speakers will look and sound great. Included foam isolation pads can also be placed on the speaker base to further decouple your speakers from the floor. Dayton Audio wood speaker stands also come with two options for feet on the bottom of the stand. Rubber feet are perfect for hard floors such as wood or tile, and Metal floor spikes will keep the stands from moving on carpet. Keep your setup organized by hiding your cables on the back side of the stand with the included cable ties and adhesive mounts. Specifications: Height: 28" • Base Dimensions: 9" (W) x 11-3/4" (D) • Platform Dimensions (small): 7-1/4" (W) x 9-1/4" (D) • Platform Dimensions (large): 9" (W) x 11-3/4" (D) • Weight Limit: 130 lbs. (60 kg).Show more Show less
